The post 30721010 Fixed Jaw plate 30701020 Swing Jaw plate for SAES CX120 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>High-manganese fixed and swing jaw plates manufactured by MiningSpares for the SAES CX120
European-type jaw crusher. SAES (Saes Makine Sanayi ve Ticaret A.Ş., Turkey) is an established
crushing and screening equipment manufacturer founded in 1992. The CX120 is their heavy-duty primary jaw crusher
designed for hard-rock quarrying and mining applications.
| لا يوجد | Drawing No. | الاسم | المواد |
|---|---|---|---|
| 1 | 30721010 | Fixed Jaw 2P (Stationary Jaw Plate) | Mn18% |
| 2 | 30701020 | Swing Jaw 2P (Movable Jaw Plate) | Mn18% |
All jaw plates are cast in Mn18% high-manganese steel (ASTM A128 Grade B2 equivalent)
using water-glass sand casting. Each plate undergoes solution heat treatment (water quenched) to achieve a fully
austenitic structure, then precision-machined on all mating surfaces for direct fitment into the SAES CX120 frame.
Key material properties:
SAES CX120 jaw plates are designed for primary crushing of medium-hard to hard rock in quarrying,
aggregate production, mining and construction-recycling operations — granite, basalt, limestone, diabase
and similar abrasive materials up to 700 mm feed size.
Q1. What is the standard material grade?
Mn18% high-manganese steel (equivalent to ASTM A128 Gr.B2). Mn18Cr2 and Mn13Cr2 grades are available
on request for highly abrasive or high-impact duties.
Q2. Can I buy individual plates?
Yes. The fixed jaw (30721010) and swing jaw (30701020) can be ordered separately.
Q3. What is the lead time?
Machined plates from stock: 7–10 working days. Fresh castings: 25–35 days. Breakdown orders
can be expedited with air freight.
Q4. What documentation is supplied?
Every shipment includes spectrometer chemical-composition report, hardness test report and dimensional
inspection report. Third-party inspection (SGS, BV, TÜV) available on request.
Q5. Is this an OEM part?
No. These are aftermarket replacement parts manufactured by MiningSpares to original drawing specifications.
Not affiliated with or endorsed by SAES Makine.
For pricing, lead time and alternative material options on SAES CX120 jaw plates, use the
إضافة إلى الاستفسار button or email us at
[email protected]. Response within one business day.
The post 30721010 Fixed Jaw plate 30701020 Swing Jaw plate for SAES CX120 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post 3440.02.010 / 3440.02.020 / 3440.01.110 Jaw Plates for Russian SMD111 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>High-manganese swing and fixed jaw plates manufactured by MiningSpares for the СМД-111
(SMD111) jaw crusher – the Russian-built primary jaw crusher also designated
ЩДП-9х12 and originally produced by Volgotsemmash (ОАО «Волгоцеммаш»).
The set consists of three cast manganese plates that form the primary crushing chamber: an upper and a lower
swing (movable) jaw plate running on the pitman, plus the stationary fixed jaw plate. Each plate is cast,
heat-treated and machined to drawing for direct replacement, with no frame modification required.
| لا يوجد | Drawing No. | الاسم | المواد | الوزن (بالكيلوغرام) |
|---|---|---|---|---|
| 1 | 3440.02.010 | Swing Jaw Plate (Upper) / Movable Jaw Plate Upper | Mn18% | 961 |
| 2 | 3440.02.020 | Swing Jaw Plate (Lower) / Movable Jaw Plate Lower | Mn18% | 960 |
| 3 | 3440.01.110 | Fixed Jaw Plate 2P / Stationary Jaw Plate | Mn18% | 840 |
| Total set weight | 2,761 | |||
Item 3 (3440.01.110) is a 2-piece (2P) fixed jaw plate design.
All three plates are cast in Mn18% high-manganese steel (austenitic manganese steel,
equivalent to ASTM A128 Grade B2 / GOST 977-88 grade 110Г13Л) using water-glass sand casting. Each casting
is solution heat-treated (water quenched) to deliver a fully austenitic structure, then precision-machined on
all mating and seating faces so it seats correctly against the СМД-111 crusher frame and pitman.
For fitment confirmation, the host machine data published by the original manufacturer:
СМД-111 jaw plates are used for primary crushing in hard-rock mining, quarry and aggregate production,
and construction-recycling duties – typically granite, gabbro, basalt and diabase duty in Russian and
CIS crushing plants.
Q1. What material grade are the plates supplied in?
Mn18% high-manganese steel as standard. Mn18Cr2 and Mn13Cr2 are available on request for highly abrasive
or high-impact duties.
Q2. Can I buy a single plate rather than the full set?
Yes. Each of the three plates can be ordered separately – just quote the drawing number(s) from the table
above when enquiring.
Q3. What is the lead time?
Machined plates from stock: 7–10 working days. Fresh castings: 25–35 days. Breakdown orders can be
expedited and shipped by airfreight.
Q4. What documentation is supplied?
Every shipment includes spectrometer chemical-composition report, hardness test report and dimensional
inspection report. Third-party inspection (SGS, BV, TÜV) can be arranged on request.
Q5. Is this an OEM part?
No. These are aftermarket replacement parts manufactured by MiningSpares to the original drawings. They are
not affiliated with, or endorsed by, the original equipment manufacturer.
For pricing, lead time and alternative material grades on СМД-111 (SMD111) jaw plates, use the
إضافة إلى الاستفسار button on this page or email us at
[email protected]. Our sales team responds within one business day.
The post 3440.02.010 / 3440.02.020 / 3440.01.110 Jaw Plates for Russian SMD111 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post C106 Jaw Plates – Fixed MM0273923 / Swing MM0273924 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>High manganese Mn18Cr2 fixed and swing jaw plates manufactured by MiningSpares for Metso Nordberg C106 jaw crushers. Each casting is produced in our own foundry, heat-treated for work-hardening performance and precision-machined on all mating faces to OEM specifications, providing a direct drop-in replacement for the original Metso parts.
| لا يوجد | الاسم | Drawing No. | المواد | Qty (pcs) | Unit Weight (kg) | Total Weight (kg) |
|---|---|---|---|---|---|---|
| 1 | لوحة الفك الثابتة | MM0273923 | Mn18Cr2 | 2 | 1,115 | 2,230 |
| 2 | لوحة الفك المتأرجح | MM0273924 | Mn18Cr2 | 1 | 1,040 | 1,040 |
The Metso Nordberg C106 is a compact primary jaw crusher designed for hard rock and recycle applications in mining, quarry and aggregate operations. With a 1060 × 700 mm (42 × 28 in) jaw opening, the C106 delivers high throughput in a small footprint and is widely used as a primary stage in both stationary and track-mounted plants. The key wear parts in the C106 are the fixed and swing jaw plates – the components that MiningSpares supplies in Mn18Cr2 high manganese steel under drawing numbers MM0273923 and MM0273924.
Metso Nordberg C106 jaw crusher and similar Metso C-series primary jaw crushers. Drawing numbers covered on this page: MM0273923 (fixed jaw plate, 2 pieces per crusher set) and MM0273924 (swing jaw plate, 1 piece per crusher set).
Our Metso C106 fixed and swing jaw plates are produced through water-glass sand casting, followed by a controlled heat treatment cycle to develop the work-hardening austenitic manganese structure. Each plate is then precision-machined on the back face, bolt-hole pattern and edge profile to ensure a perfect fit with the C106 jaw crusher frame and to match the original swing geometry of the machine.
Metso C106 jaw plates are used in primary crushing of granite, basalt, gneiss, quartzite, iron ore, copper ore, gold ore, limestone and other medium-hard to hard rock. Typical installations include hard rock mining operations, quarries, aggregate production, and construction and demolition recycling.
Browse more high manganese crusher wear parts from MiningSpares:
For pricing, lead time and material options on Metso C106 jaw plates MM0273923 and MM0273924, please use the إضافة إلى الاستفسار button on this page or email us at [email protected]. Our sales team will respond within one business day.
The post C106 Jaw Plates – Fixed MM0273923 / Swing MM0273924 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Full Set of Jaw Plates Cheek plates Wedges For CT4254 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The TRIO CT4254 is a heavy-duty single-toggle jaw crusher widely used in mining, quarrying, aggregate production, and recycling for primary and secondary crushing of hard rock, ores, and demolition material. Its robust cast-steel frame and high-inertia eccentric shaft deliver consistent throughput under continuous duty.
The crushing chamber is formed by two opposing wear surfaces — the fixed jaw (stationary) and the swing jaw (reciprocating). Material is compressed and fractured between them on every stroke. Surrounding these liners, a set of supporting and clamping components keeps the wear parts seated, aligned, and tensioned so the crusher runs safely at full capacity. The seven parts listed below cover the complete wear and structural interface set for the CT4254 jaw module:
| لا يوجد | Part Name | رقم الجزء | الطراز | Function | الوزن (بالكيلوغرام) |
|---|---|---|---|---|---|
| 1 | لوحة الفك المتأرجح | TRIO17052179 | CT4254 | Movable crushing surface mounted on the swing jaw; the high-impact wear liner that does most of the comminution work. | 2,857 |
| 2 | لوحة الفك الثابتة | TRIO17052178 | CT4254 | Stationary crushing surface; the fixed wear liner against which rock is compressed and fractured. Directly determines product shape and reduction ratio. | 2,990 |
| 3 | Wedge Die, Swing LH | TRIO17003911 | CT4254 | Left-hand clamping wedge that locks the swing jaw liner firmly against the swing jaw body, maintaining crushing force and preventing liner movement. | 50.8 |
| 4 | Wedge Die, Swing RH | TRIO17003912 | CT4254 | Right-hand clamping wedge that locks the swing jaw liner firmly against the swing jaw body, maintaining crushing force and preventing liner movement. | 50.8 |
| 5 | Low Cheek Plate, LH | TRIO17003942 | CT4254 | Left-hand lower side liner protecting the frame at the discharge side; replacement restores proper chamber alignment. | 271 |
| 6 | Upper Cheek Plate, RH | TRIO17003941 | CT4254 | Right-hand upper side liner that shields the crusher frame from abrasive material flow, extending frame service life. | 387 |
| 7 | Wedge Block | TRIO17003948 | CT4254 | Hold-down / tension block that maintains liner position and crushing gap, securing the wear parts under operational load. |
All wear liners in this set are produced from high-manganese steel (Mn13 / Mn18Cr2) selected for its work-hardening behaviour — the surface grows harder under impact, giving excellent abrasion resistance in hard-rock service. Cheek plates and wedge components use cast carbon / low-alloy steel with precision machining for accurate fit.
Manufacturing follows a controlled process route:
Q: Are these parts interchangeable with the original TRIO CT4254?
A: Yes. All parts are manufactured to original equipment drawings and are fully interchangeable with genuine TRIO CT4254 components.
Q: What is the typical lead time?
A: Standard items ship in 2–4 weeks; urgent orders can be discussed case by case.
Q: Can you supply parts to our own drawings or specifications?
A: Yes. We produce both standard and custom wear parts; send your drawing, sample, or part number and we will quote.
Q: Do you provide technical support for installation?
A: Yes. Layout drawings and fitting guidance are available; our engineers can advise on liner change-out and chamber setup.
Request a Quote for TRIO CT4254 Parts
.parts-table { width:100%; border-collapse:collapse; margin:16px 0; }
.parts-table th, .parts-table td { border:1px solid #ddd; padding:8px 10px; text-align:left; vertical-align:top; }
.parts-table th { background:#f5f5f5; font-weight:600; }
.parts-table tr:nth-child(even) { background:#fafafa; }
.button { display:inline-block; background:#c0392b; color:#fff !important; padding:12px 24px; border-radius:4px; text-decoration:none; font-weight:600; }
@media (max-width:768px) { .parts-table { display:block; overflow-x:auto; white-space:nowrap; } }
The post Full Set of Jaw Plates Cheek plates Wedges For CT4254 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Fixed and Swing Crushing Jaw 2419250 2419252 suit Kleemann MC11O Ri EVO appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>
| لا يوجد | اسم العنصر | Parts Number | نموذج الكسارة | الوزن (بالكيلوغرام) | الرسم | Mould |
| 1 | Moving Crusher Jaw RT-Expert | 2419250 | MC 110 Ri EVO | 1,370 | نعم | نعم |
| 2 | Fixed Crusher Jaw RT-Expert | 2419252 | MC 110 Ri EVO | 1,172 | نعم | نعم |
| 3 | Cheek Plate Upper RT-Expert | 2242112 | MC 110 Ri EVO | 130 | نعم | نعم |
| 4 | اللوحة الجانبية اليسرى السفلية السفلية | 2242120 | MC 110 Ri EVO | 110 | نعم | نعم |
| 5 | صفيحة الوجنة العلوية L | 2242111 | MC 110 Ri EVO | 130 | نعم | نعم |
| 6 | اللوحة الجانبية اليمنى السفلية السفلية | 2242115 | MC 110 Ri EVO | 110 | نعم | نعم |
The post Fixed and Swing Crushing Jaw 2419250 2419252 suit Kleemann MC11O Ri EVO appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Fixed Jaw Plate Long and Swing Jaw Plate Long Suit SBM C6X145 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>
| لا يوجد | اسم العنصر | Parts Number | نموذج الكسارة | الوزن (بالكيلوغرام) | الرسم | Mould |
| 1 | Fixed Jaw Plate long | 11006003115-L | C6X145 | 4,450 | نعم | نعم |
| 2 | Swin Jaw Plate long | 11006003118-L | C6X145 | 2,920 | نعم | نعم |
The post Fixed Jaw Plate Long and Swing Jaw Plate Long Suit SBM C6X145 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Fix Jaw plate and Swing Jaw plate suit Drobmash ДРО-609А Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>
| لا يوجد | اسم العنصر | Parts Number | نموذج الكسارة | الوزن (بالكيلوغرام) | الرسم | Mould |
| 1 | Movable jaw plate | 1060900012 | ДРО 609А | 1,591 | نعم | نعم |
| 2 | لوحة الفك الثابتة | 1060902014 | ДРО 609А | 1,442 | نعم | نعم |
The post Fix Jaw plate and Swing Jaw plate suit Drobmash ДРО-609А Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Fixed Jaw Quarry Tooth Long and Swing Jaw Quarry Tooth Long suit C160 Crusher XT750 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>| لا يوجد | رمز السلعة | At/Material | اسم العنصر | الوصف | الوزن | |
|---|---|---|---|---|---|---|
| 1 | N11924295 | XT750 | Fixed Jaw Quarry 1P | C160 | 4,500 | |
| 2 | N11924296 | XT750 | Swin Jaw Quarry 1P | C160 | 3,700 |
The post Fixed Jaw Quarry Tooth Long and Swing Jaw Quarry Tooth Long suit C160 Crusher XT750 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Fixed Jaw Plate and Swing Jaw Plate suit СМ-16Д Jaw Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>| لا يوجد | اسم العنصر | Parts Number | نموذج الكسارة | الوزن (بالكيلوغرام) |
|---|---|---|---|---|
| 1 | لوحة الفك الثابتة | 162-0-1 | CM-16Д | 707 |
| 2 | لوحة الفك المتأرجح | 162-2-1 | CM-16Д | 715 |
The post Fixed Jaw Plate and Swing Jaw Plate suit СМ-16Д Jaw Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post 1121.01.256 Jaw plate suit Uralmash SHDP1500/2100 Double Toggle Jaw Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>| لا يوجد | رمز السلعة | اسم العنصر | الوصف | الكمية | الوزن | ||
|---|---|---|---|---|---|---|---|
| 1 | 1121.04.01/8811-01 | Front Toogle Plate | Uralmash SHDP1500_2100 | 2 Pc(s) | 2,216 | ||
| 2 | 1121.04.02/8812-01Г | Rear Toogle Plate | Uralmash SHDP1500_2100 | 4 Pc(s) | 1,226 | ||
| 3 | 1121.01.256/8801-01 | Jaw Plate (8pcs/Set) | Uralmash SHDP1500_2100 | 12 Pc(s) | 665 |
The post 1121.01.256 Jaw plate suit Uralmash SHDP1500/2100 Double Toggle Jaw Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>