The post Full Set of Jaw Plates Cheek plates Wedges For TRIO CT4254 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The TRIO CT4254 is a heavy-duty single-toggle jaw crusher widely used in mining, quarrying, aggregate production, and recycling for primary and secondary crushing of hard rock, ores, and demolition material. Its robust cast-steel frame and high-inertia eccentric shaft deliver consistent throughput under continuous duty.
The crushing chamber is formed by two opposing wear surfaces — the fixed jaw (stationary) and the swing jaw (reciprocating). Material is compressed and fractured between them on every stroke. Surrounding these liners, a set of supporting and clamping components keeps the wear parts seated, aligned, and tensioned so the crusher runs safely at full capacity. The seven parts listed below cover the complete wear and structural interface set for the CT4254 jaw module:
| لا يوجد | Part Name | رقم الجزء | الطراز | Function | الوزن (بالكيلوغرام) |
|---|---|---|---|---|---|
| 1 | لوحة الفك المتأرجح | TRIO17052179 | CT4254 | Movable crushing surface mounted on the swing jaw; the high-impact wear liner that does most of the comminution work. | 2,857 |
| 2 | لوحة الفك الثابتة | TRIO17052178 | CT4254 | Stationary crushing surface; the fixed wear liner against which rock is compressed and fractured. Directly determines product shape and reduction ratio. | 2,990 |
| 3 | Wedge Die, Swing LH | TRIO17003911 | CT4254 | Left-hand clamping wedge that locks the swing jaw liner firmly against the swing jaw body, maintaining crushing force and preventing liner movement. | 50.8 |
| 4 | Wedge Die, Swing RH | TRIO17003912 | CT4254 | Right-hand clamping wedge that locks the swing jaw liner firmly against the swing jaw body, maintaining crushing force and preventing liner movement. | 50.8 |
| 5 | Low Cheek Plate, LH | TRIO17003942 | CT4254 | Left-hand lower side liner protecting the frame at the discharge side; replacement restores proper chamber alignment. | 271 |
| 6 | Upper Cheek Plate, RH | TRIO17003941 | CT4254 | Right-hand upper side liner that shields the crusher frame from abrasive material flow, extending frame service life. | 387 |
| 7 | Wedge Block | TRIO17003948 | CT4254 | Hold-down / tension block that maintains liner position and crushing gap, securing the wear parts under operational load. |
All wear liners in this set are produced from high-manganese steel (Mn13 / Mn18Cr2) selected for its work-hardening behaviour — the surface grows harder under impact, giving excellent abrasion resistance in hard-rock service. Cheek plates and wedge components use cast carbon / low-alloy steel with precision machining for accurate fit.
Manufacturing follows a controlled process route:
Q: Are these parts interchangeable with the original TRIO CT4254?
A: Yes. All parts are manufactured to original equipment drawings and are fully interchangeable with genuine TRIO CT4254 components.
Q: What is the typical lead time?
A: Standard items ship in 2–4 weeks; urgent orders can be discussed case by case.
Q: Can you supply parts to our own drawings or specifications?
A: Yes. We produce both standard and custom wear parts; send your drawing, sample, or part number and we will quote.
Q: Do you provide technical support for installation?
A: Yes. Layout drawings and fitting guidance are available; our engineers can advise on liner change-out and chamber setup.
Request a Quote for TRIO CT4254 Parts
.parts-table { width:100%; border-collapse:collapse; margin:16px 0; }
.parts-table th, .parts-table td { border:1px solid #ddd; padding:8px 10px; text-align:left; vertical-align:top; }
.parts-table th { background:#f5f5f5; font-weight:600; }
.parts-table tr:nth-child(even) { background:#fafafa; }
.button { display:inline-block; background:#c0392b; color:#fff !important; padding:12px 24px; border-radius:4px; text-decoration:none; font-weight:600; }
@media (max-width:768px) { .parts-table { display:block; overflow-x:auto; white-space:nowrap; } }
The post Full Set of Jaw Plates Cheek plates Wedges For TRIO CT4254 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post TRIO17039806 Bowl Liner TRIO17039803 Mantle For TP600 Standard Cone crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>| ITEM | PART # | DESCRIPTION | الكمية. | |
| 1 | TRIO17039803 | Mantle – Standard * | 1 | |
| 2 | TRIO17039815 | Mantle – Short Head * |
| ITEM | PART # | DESCRIPTION | الكمية. | |
| 1 | TRIO17039806 | Bowl Liner – SC * |
1 |
|
| 2 | TRIO17039802 | Bowl Liner – SHF * | ||
| 3 | TRIO17039812 | Bowl Liner – SM * | ||
| 4 | TRIO17039810 | Bowl Liner – SHC * | ||
| 5 | TRIO17039814 | Bowl Liner – SF * | ||
| 6 | TRIO17039804 | Bowl Liner – SHM * |
Whether you’re replenishing spare parts inventory, performing routine maintenance, or addressing emergency crusher repairs, these TP600 cone crusher components deliver reliable performance and long-term value. Their precision fit, heavy-duty construction, and compatibility with the TP600 make them the ideal choice for mining operations seeking to minimize downtime and maximize productivity. Contact us via WhatsApp or email today for a customized quote and technical drawing!
The post TRIO17039806 Bowl Liner TRIO17039803 Mantle For TP600 Standard Cone crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>