Product Overview

High manganese steel wear parts for the MCO9 mobile cone crusher: the Mantle STD (2295672) and the matching Torch Ring (2545973). The mantle is the moving crushing member mounted on the cone head, and the torch ring sits beneath it retaining and sealing the mantle assembly on the head — the two parts are normally replaced together during a liner change.

Wear Parts List

Equipment Overview

The MCO9 is a mobile cone crusher used as a secondary or tertiary stage in aggregate production, quarrying and recycling. Material is crushed between the mantle, which gyrates on the cone head, and the stationary bowl liner in the upper frame. Because the mantle carries the moving side of the crushing action, its wear profile controls the closed-side setting and the finished product shape — a worn mantle widens the gap locally and produces oversize and flaky material.

Material and Casting

• Mn18Cr2 high manganese steel — work-hardening austenitic manganese casting, giving a hard wearing surface under load with a tough core to survive tramp metal.
• Water-glass sand casting followed by controlled heat treatment for a consistent austenitic structure.
• Machined seating faces so the mantle pulls down square on the cone head and the torch ring beds correctly without rocking.
• Profile matched to the standard (STD) cavity for correct nip angle and throughput.

Applications

Suited to secondary and tertiary crushing of granite, basalt, limestone, river gravel, iron ore and construction and demolition waste. Wear life depends on feed grading, the closed-side setting and the abrasiveness of the rock; replacing the mantle and the torch ring as a set avoids the sealing and retention problems that arise from mixing new and worn components.

Related Parts Available

• MCO9 cone crusher bowl liner and concave ring
• Mantle, bowl liner, concave and torch ring for other mobile cone crushers
• Cone crusher wear parts in Mn14Cr2, Mn18Cr2 and Mn22Cr2 grades

Request a Quotation

For pricing, lead time and availability on the MCO9 cone crusher wear parts (2295672 mantle STD and 2545973 torch ring), please use the Add to Enquiry button on this page or email us at [email protected]. Our sales team responds within one business day.

The post MCO9 Cone Crusher Wear Parts Mantle STD and Torch Ring Mn18Cr2 Casting appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

Product Overview

This is a complete jaw wear parts set for the MC110R EVO and MC110Z EVO mobile jaw crushers, comprising the fixed crusher jaw, the moving crusher jaw and a pair of lower cheek plates. Manufactured by MiningSpares in Mn18Cr2 high manganese steel, these are the components that form the crushing chamber and take the direct wear from the feed material — so they are the parts replaced on a routine maintenance interval.

The set is supplied as a matched group so that the fixed jaw, moving jaw and cheek plates seat correctly against the jaw stock and frame, keeping the crushing gap and the jaw closing geometry within specification.

Wear Parts List

Equipment Overview

The MC110R EVO / MC110Z EVO is a mobile jaw crusher used as a primary crusher in demolition and recycling, natural stone processing, and quarrying. The machine uses a single-toggle jaw crusher unit with a hydraulically adjustable gap, fed by an independent vibrating feeder. The crushing chamber is lined by the fixed jaw (mounted on the crusher frame) and the moving jaw (carried on the jaw stock), with lower cheek plates closing the sides of the chamber. The toothed profile of both jaws grips and compresses the material, so tooth height and profile wear directly control the reduction ratio and the final product shape.

Material and Casting

• Mn18Cr2 high manganese steel — austenitic manganese casting that work-hardens rapidly under impact, developing a hard wear surface while the core stays tough enough to absorb uncrushable material.
• Water-glass sand casting with a controlled heat-treatment cycle to develop a uniform austenitic structure free from excessive carbides.
• Precision machining of the back face, bolt-hole pattern and wedge seating faces so the plates pull down flat against the jaw stock and frame.
• Tooth profile and pitch matched to the original jaw geometry for correct nip angle and throughput.

Applications

Typical use includes construction and demolition waste recycling, asphalt and concrete recycling, natural rock crushing (granite, basalt, limestone, river gravel), and quarry primary crushing. The wear life of the fixed and moving jaws depends on feed size, material abrasiveness and the gap setting — a matched set keeps both jaws wearing evenly.

Related Parts Available

• Fixed and moving jaw 2419250 / 2419252 for MC110 Ri EVO
• MC110Z fixed jaw F10373201 and matching swing jaw
• Jaw plates, cheek plates, wedges and toggle components for other mobile jaw crushers

Request a Quotation

For pricing, lead time and availability on the MC110R EVO / MC110Z EVO jaw wear parts set (2419253 fixed jaw, 2419251 moving jaw, 2355334 / 2355337 lower cheek plates), please use the Add to Enquiry button on this page or email us at [email protected]. Our sales team responds within one business day.

The post MC110R EVO MC110Z EVO Jaw Crusher Wear Parts Set Fixed Jaw Moving Jaw and Cheek Plates Mn18Cr2 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

High manganese Mn18Cr2 fixed and swing jaw plates manufactured by MiningSpares for Metso Nordberg C106 jaw crushers. Each casting is produced in our own foundry, heat-treated for work-hardening performance and precision-machined on all mating faces to OEM specifications, providing a direct drop-in replacement for the original Metso parts.

Specification Table – Metso C106 Jaw Plate Set

About the Metso Nordberg C106 Jaw Crusher

The Metso Nordberg C106 is a compact primary jaw crusher designed for hard rock and recycle applications in mining, quarry and aggregate operations. With a 1060 × 700 mm (42 × 28 in) jaw opening, the C106 delivers high throughput in a small footprint and is widely used as a primary stage in both stationary and track-mounted plants. The key wear parts in the C106 are the fixed and swing jaw plates – the components that MiningSpares supplies in Mn18Cr2 high manganese steel under drawing numbers MM0273923 and MM0273924.

Why MiningSpares Metso C106 Jaw Plates

• Cast in our own foundry using premium Mn18Cr2 high manganese steel
• Heat treatment optimised for work-hardening under impact in primary crushing
• Precision machined to OEM drawing tolerances on back face and bolt-hole pattern
• Direct replacement for the original Metso parts MM0273923 and MM0273924
• Stock availability for standard C106 jaw plate sets in Mn18Cr2 grade
• Custom material grades available on request (Mn14, Mn22Cr2, modified manganese)

Compatible Equipment

Metso Nordberg C106 jaw crusher and similar Metso C-series primary jaw crushers. Drawing numbers covered on this page: MM0273923 (fixed jaw plate, 2 pieces per crusher set) and MM0273924 (swing jaw plate, 1 piece per crusher set).

Manufacturing Process

Our Metso C106 fixed and swing jaw plates are produced through water-glass sand casting, followed by a controlled heat treatment cycle to develop the work-hardening austenitic manganese structure. Each plate is then precision-machined on the back face, bolt-hole pattern and edge profile to ensure a perfect fit with the C106 jaw crusher frame and to match the original swing geometry of the machine.

Applications

Metso C106 jaw plates are used in primary crushing of granite, basalt, gneiss, quartzite, iron ore, copper ore, gold ore, limestone and other medium-hard to hard rock. Typical installations include hard rock mining operations, quarries, aggregate production, and construction and demolition recycling.

Related Crusher Wear Parts

Browse more high manganese crusher wear parts from MiningSpares:

• PYB1200 Bowl Liner and Mantle
• MX4 Bowl Liner C for Cone Crusher
• H8800 Hydrocone Liner
• Boratas SDK111 Jaw Plate Wear Parts

Request a Quotation

For pricing, lead time and material options on Metso C106 jaw plates MM0273923 and MM0273924, please use the Add to Enquiry button on this page or email us at [email protected]. Our sales team will respond within one business day.

The post MM0273923 Fixed Jaw Quarry MM0273924 Swing Jaw Quarry For C106 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

The post A241 Stationary Jaw Tooth A242 Swing Jaw Tooth for NAKAYAMA AC2415 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

The post Fixed Jaw Plate Curved 81-01-22322C Swing Jaw Plate 81-01- 22321 Suit Tesab 10580 Mobile Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

The post RC423 Stationary Jaw Tooth & RC424 Swing Jaw Tooth Suit Nakayama AC4220B Jaw Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

The post F10038791 Ceramic Blow Bar for Kleemann MC 122Z Impact Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

MiningSpares’ FKB2120 Mantle and bowl liner uses high-quality manganese alloys, including 13% Standard, 18% Premium, and 22% High alloys, to cater to diverse operational requirements and can be customized according to your needs
We also have various colors for you to choose from, red, blue, green, black, gray and so on

The manufacturing process is very strict to ensure a perfect fit with the machine.

MiningSpares’FKB2120 Mantle and bowl liner are manufactured using advanced casting processes. During the manufacturing process, we strictly control material selection and process flow to ensure excellence in product quality and performance. We use high quality alloy steel materials combined with advanced casting technology to ensure that our products have excellent wear and impact resistance. In addition, our manufacturing process includes precision machining and heat treatment processes to further enhance strength and durability

For most of the world famous brands like Mettso, Sandvick, Terex, Shanbao, Telsmith and so on
We all have a large inventory of original drawings, which helps us produce at a relatively low cost.

The post 6039273E Mantle HD and Concave For Terex Finlay C1540 Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

MiningSpares’ NW116 Jaw Movable HD and Jaw Fixed HD use high-quality manganese alloys, including 13% Standard, 18% Premium, and 22% High alloys, to cater to diverse operational requirements and can be customized according to your needs
We also have various colors for you to choose from, red, blue, green, black, gray and so on

The manufacturing process is very strict to ensure a perfect fit with the machine.

MiningSpares’NW116 Jaw Movable HD are manufactured using advanced casting processes. During the manufacturing process, we strictly control material selection and process flow to ensure excellence in product quality and performance. We use high quality alloy steel materials combined with advanced casting technology to ensure that our products have excellent wear and impact resistance. In addition, our manufacturing process includes precision machining and heat treatment processes to further enhance strength and durability

For most of the world famous brands like Mettso, Sandvick, Terex, Shanbao, Telsmith and so on
We all have a large inventory of original drawings, which helps us produce at a relatively low cost.

The post MM0378715 Jaw Movable HD MM0378716 Jaw Fixed HD Suit NW116 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

MiningSpares’ NW116 Jaw Fixed HD uses high-quality manganese alloys, including 13% Standard, 18% Premium, and 22% High alloys, to cater to diverse operational requirements and can be customized according to your needs
We also have various colors for you to choose from, red, blue, green, black, gray and so on

The manufacturing process is very strict to ensure a perfect fit with the machine.

MiningSpares’NW116 Jaw Fixed HD are manufactured using advanced casting processes. During the manufacturing process, we strictly control material selection and process flow to ensure excellence in product quality and performance. We use high quality alloy steel materials combined with advanced casting technology to ensure that our products have excellent wear and impact resistance. In addition, our manufacturing process includes precision machining and heat treatment processes to further enhance strength and durability

For most of the world famous brands like Mettso, Sandvick, Terex, Shanbao, Telsmith and so on
We all have a large inventory of original drawings, which helps us produce at a relatively low cost.

The post NW116 Jaw Fixed HD For Jaw Crusher MM0378716 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.