The post MCO9 Cone Crusher Wear Parts Mantle STD and Torch Ring Mn18Cr2 Casting appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>Product Overview
High manganese steel wear parts for the MCO9 mobile cone crusher: the Mantle STD (2295672) and the matching Torch Ring (2545973). The mantle is the moving crushing member mounted on the cone head, and the torch ring sits beneath it retaining and sealing the mantle assembly on the head — the two parts are normally replaced together during a liner change.
Wear Parts List
| No. | Item Code | Item Name | Description |
|---|---|---|---|
| 1 | 2295672 | Mantle STD | MCO9 |
| 2 | 2545973 | Torch Ring | MCO9 |
Equipment Overview
The MCO9 is a mobile cone crusher used as a secondary or tertiary stage in aggregate production, quarrying and recycling. Material is crushed between the mantle, which gyrates on the cone head, and the stationary bowl liner in the upper frame. Because the mantle carries the moving side of the crushing action, its wear profile controls the closed-side setting and the finished product shape — a worn mantle widens the gap locally and produces oversize and flaky material.
Material and Casting
- Mn18Cr2 high manganese steel — work-hardening austenitic manganese casting, giving a hard wearing surface under load with a tough core to survive tramp metal.
- Water-glass sand casting followed by controlled heat treatment for a consistent austenitic structure.
- Machined seating faces so the mantle pulls down square on the cone head and the torch ring beds correctly without rocking.
- Profile matched to the standard (STD) cavity for correct nip angle and throughput.
Applications
Suited to secondary and tertiary crushing of granite, basalt, limestone, river gravel, iron ore and construction and demolition waste. Wear life depends on feed grading, the closed-side setting and the abrasiveness of the rock; replacing the mantle and the torch ring as a set avoids the sealing and retention problems that arise from mixing new and worn components.
Related Parts Available
- MCO9 cone crusher bowl liner and concave ring
- Mantle, bowl liner, concave and torch ring for other mobile cone crushers
- Cone crusher wear parts in Mn14Cr2, Mn18Cr2 and Mn22Cr2 grades
Request a Quotation
For pricing, lead time and availability on the MCO9 cone crusher wear parts (2295672 mantle STD and 2545973 torch ring), please use the Add to Enquiry button on this page or email us at [email protected]. Our sales team responds within one business day.
The post MCO9 Cone Crusher Wear Parts Mantle STD and Torch Ring Mn18Cr2 Casting appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post MC110R EVO MC110Z EVO Jaw Crusher Wear Parts Set Fixed Jaw Moving Jaw and Cheek Plates Mn18Cr2 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>Product Overview
This is a complete jaw wear parts set for the MC110R EVO and MC110Z EVO mobile jaw crushers, comprising the fixed crusher jaw, the moving crusher jaw and a pair of lower cheek plates. Manufactured by MiningSpares in Mn18Cr2 high manganese steel, these are the components that form the crushing chamber and take the direct wear from the feed material — so they are the parts replaced on a routine maintenance interval.
The set is supplied as a matched group so that the fixed jaw, moving jaw and cheek plates seat correctly against the jaw stock and frame, keeping the crushing gap and the jaw closing geometry within specification.
Wear Parts List
| No. | Item Code | Item Name | Description |
|---|---|---|---|
| 1 | 2419253 | Fixed Crusher Jaw | MC110R EVO / MC110Z EVO |
| 2 | 2419251 | Moving Crusher Jaw | MC110R EVO / MC110Z EVO |
| 3 | 2355334 | Lower Cheek Plate L | MC110Z |
| 4 | 2355337 | Lower Cheek Plate R | MC110Z |
Equipment Overview
The MC110R EVO / MC110Z EVO is a mobile jaw crusher used as a primary crusher in demolition and recycling, natural stone processing, and quarrying. The machine uses a single-toggle jaw crusher unit with a hydraulically adjustable gap, fed by an independent vibrating feeder. The crushing chamber is lined by the fixed jaw (mounted on the crusher frame) and the moving jaw (carried on the jaw stock), with lower cheek plates closing the sides of the chamber. The toothed profile of both jaws grips and compresses the material, so tooth height and profile wear directly control the reduction ratio and the final product shape.
Material and Casting
- Mn18Cr2 high manganese steel — austenitic manganese casting that work-hardens rapidly under impact, developing a hard wear surface while the core stays tough enough to absorb uncrushable material.
- Water-glass sand casting with a controlled heat-treatment cycle to develop a uniform austenitic structure free from excessive carbides.
- Precision machining of the back face, bolt-hole pattern and wedge seating faces so the plates pull down flat against the jaw stock and frame.
- Tooth profile and pitch matched to the original jaw geometry for correct nip angle and throughput.
Applications
Typical use includes construction and demolition waste recycling, asphalt and concrete recycling, natural rock crushing (granite, basalt, limestone, river gravel), and quarry primary crushing. The wear life of the fixed and moving jaws depends on feed size, material abrasiveness and the gap setting — a matched set keeps both jaws wearing evenly.
Related Parts Available
- Fixed and moving jaw 2419250 / 2419252 for MC110 Ri EVO
- MC110Z fixed jaw F10373201 and matching swing jaw
- Jaw plates, cheek plates, wedges and toggle components for other mobile jaw crushers
Request a Quotation
For pricing, lead time and availability on the MC110R EVO / MC110Z EVO jaw wear parts set (2419253 fixed jaw, 2419251 moving jaw, 2355334 / 2355337 lower cheek plates), please use the Add to Enquiry button on this page or email us at [email protected]. Our sales team responds within one business day.
The post MC110R EVO MC110Z EVO Jaw Crusher Wear Parts Set Fixed Jaw Moving Jaw and Cheek Plates Mn18Cr2 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post 30721010 Fixed Jaw plate 30701020 Swing Jaw plate for SAES CX120 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>High-manganese fixed and swing jaw plates manufactured by MiningSpares for the SAES CX120
European-type jaw crusher. SAES (Saes Makine Sanayi ve Ticaret A.Ş., Turkey) is an established
crushing and screening equipment manufacturer founded in 1992. The CX120 is their heavy-duty primary jaw crusher
designed for hard-rock quarrying and mining applications.
SAES CX120 Jaw Plate Specification Table
| No. | Drawing No. | Name | Material |
|---|---|---|---|
| 1 | 30721010 | Fixed Jaw 2P (Stationary Jaw Plate) | Mn18% |
| 2 | 30701020 | Swing Jaw 2P (Movable Jaw Plate) | Mn18% |
Material & Casting Process
All jaw plates are cast in Mn18% high-manganese steel (ASTM A128 Grade B2 equivalent)
using water-glass sand casting. Each plate undergoes solution heat treatment (water quenched) to achieve a fully
austenitic structure, then precision-machined on all mating surfaces for direct fitment into the SAES CX120 frame.
Key material properties:
- As-cast hardness: HB 200–220
- Work-hardened surface hardness in service: HB 450+
- Toughness: excellent impact resistance under high-compression crushing duty
Machine Data – SAES CX120 European Jaw Crusher
- Manufacturer: SAES (Saes Makine Sanayi ve Ticaret A.Ş., Turkey)
- Type: Heavy-duty primary jaw crusher (European type)
- Feed opening (width × depth): 1,200 × 870 mm
- Maximum feed lump size: 700 mm
- CSS (discharge setting) range: 70–200 mm (adjustable)
- Processing capacity: 175–610 t/h (material-dependent)
- Motor power: 160 kW (4-pole)
- Overall dimensions (L × W × H): 3,700 × 2,790 × 2,950 mm
- Drive: V-belt drive system with heavy flywheel inertia
Applications
SAES CX120 jaw plates are designed for primary crushing of medium-hard to hard rock in quarrying,
aggregate production, mining and construction-recycling operations — granite, basalt, limestone, diabase
and similar abrasive materials up to 700 mm feed size.
Frequently Asked Questions
Q1. What is the standard material grade?
Mn18% high-manganese steel (equivalent to ASTM A128 Gr.B2). Mn18Cr2 and Mn13Cr2 grades are available
on request for highly abrasive or high-impact duties.
Q2. Can I buy individual plates?
Yes. The fixed jaw (30721010) and swing jaw (30701020) can be ordered separately.
Q3. What is the lead time?
Machined plates from stock: 7–10 working days. Fresh castings: 25–35 days. Breakdown orders
can be expedited with air freight.
Q4. What documentation is supplied?
Every shipment includes spectrometer chemical-composition report, hardness test report and dimensional
inspection report. Third-party inspection (SGS, BV, TÜV) available on request.
Q5. Is this an OEM part?
No. These are aftermarket replacement parts manufactured by MiningSpares to original drawing specifications.
Not affiliated with or endorsed by SAES Makine.
Request a Quotation
For pricing, lead time and alternative material options on SAES CX120 jaw plates, use the
Add to Enquiry button or email us at
[email protected]. Response within one business day.
The post 30721010 Fixed Jaw plate 30701020 Swing Jaw plate for SAES CX120 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post 3440.02.010 / 3440.02.020 / 3440.01.110 Jaw Plates for Russian SMD111 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>High-manganese swing and fixed jaw plates manufactured by MiningSpares for the СМД-111
(SMD111) jaw crusher – the Russian-built primary jaw crusher also designated
ЩДП-9х12 and originally produced by Volgotsemmash (ОАО «Волгоцеммаш»).
The set consists of three cast manganese plates that form the primary crushing chamber: an upper and a lower
swing (movable) jaw plate running on the pitman, plus the stationary fixed jaw plate. Each plate is cast,
heat-treated and machined to drawing for direct replacement, with no frame modification required.
СМД-111 Jaw Plate Specification Table
| No. | Drawing No. | Name | Material | Weight (kg) |
|---|---|---|---|---|
| 1 | 3440.02.010 | Swing Jaw Plate (Upper) / Movable Jaw Plate Upper | Mn18% | 961 |
| 2 | 3440.02.020 | Swing Jaw Plate (Lower) / Movable Jaw Plate Lower | Mn18% | 960 |
| 3 | 3440.01.110 | Fixed Jaw Plate 2P / Stationary Jaw Plate | Mn18% | 840 |
| Total set weight | 2,761 | |||
Item 3 (3440.01.110) is a 2-piece (2P) fixed jaw plate design.
Material & Casting Process
All three plates are cast in Mn18% high-manganese steel (austenitic manganese steel,
equivalent to ASTM A128 Grade B2 / GOST 977-88 grade 110Г13Л) using water-glass sand casting. Each casting
is solution heat-treated (water quenched) to deliver a fully austenitic structure, then precision-machined on
all mating and seating faces so it seats correctly against the СМД-111 crusher frame and pitman.
- As-cast hardness: HB 200–220
- Work-hardened surface hardness in service: HB 450+
- Key benefit: the more the plate is impacted, the harder the working surface becomes –
ideal for the high-compression duty of a primary jaw chamber
Machine Data – СМД-111 (ЩДП-9х12)
For fitment confirmation, the host machine data published by the original manufacturer:
- Designation: СМД-111 / ЩДП-9х12
- Feed opening (width × length): 900 × 1200 mm
- Maximum feed lump size: 750 mm
- Overall dimensions (L × W × H): 4,942 × 3,150 × 3,300 mm (excluding drive)
- Machine mass (less components): 54.3 t
- Application: primary crushing of granite, basalt, quartzite, sandstone, limestone and ores
with a compressive strength up to 300 MPa
Applications
СМД-111 jaw plates are used for primary crushing in hard-rock mining, quarry and aggregate production,
and construction-recycling duties – typically granite, gabbro, basalt and diabase duty in Russian and
CIS crushing plants.
Frequently Asked Questions
Q1. What material grade are the plates supplied in?
Mn18% high-manganese steel as standard. Mn18Cr2 and Mn13Cr2 are available on request for highly abrasive
or high-impact duties.
Q2. Can I buy a single plate rather than the full set?
Yes. Each of the three plates can be ordered separately – just quote the drawing number(s) from the table
above when enquiring.
Q3. What is the lead time?
Machined plates from stock: 7–10 working days. Fresh castings: 25–35 days. Breakdown orders can be
expedited and shipped by airfreight.
Q4. What documentation is supplied?
Every shipment includes spectrometer chemical-composition report, hardness test report and dimensional
inspection report. Third-party inspection (SGS, BV, TÜV) can be arranged on request.
Q5. Is this an OEM part?
No. These are aftermarket replacement parts manufactured by MiningSpares to the original drawings. They are
not affiliated with, or endorsed by, the original equipment manufacturer.
Request a Quotation
For pricing, lead time and alternative material grades on СМД-111 (SMD111) jaw plates, use the
Add to Enquiry button on this page or email us at
[email protected]. Our sales team responds within one business day.
The post 3440.02.010 / 3440.02.020 / 3440.01.110 Jaw Plates for Russian SMD111 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post C106 Jaw Plates – Fixed MM0273923 / Swing MM0273924 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>High manganese Mn18Cr2 fixed and swing jaw plates manufactured by MiningSpares for Metso Nordberg C106 jaw crushers. Each casting is produced in our own foundry, heat-treated for work-hardening performance and precision-machined on all mating faces to OEM specifications, providing a direct drop-in replacement for the original Metso parts.
Specification Table – Metso C106 Jaw Plate Set
| No. | Name | Drawing No. | Material | Qty (pcs) | Unit Weight (kg) | Total Weight (kg) |
|---|---|---|---|---|---|---|
| 1 | Fixed Jaw Plate | MM0273923 | Mn18Cr2 | 2 | 1,115 | 2,230 |
| 2 | Swing Jaw Plate | MM0273924 | Mn18Cr2 | 1 | 1,040 | 1,040 |
About the Metso Nordberg C106 Jaw Crusher
The Metso Nordberg C106 is a compact primary jaw crusher designed for hard rock and recycle applications in mining, quarry and aggregate operations. With a 1060 × 700 mm (42 × 28 in) jaw opening, the C106 delivers high throughput in a small footprint and is widely used as a primary stage in both stationary and track-mounted plants. The key wear parts in the C106 are the fixed and swing jaw plates – the components that MiningSpares supplies in Mn18Cr2 high manganese steel under drawing numbers MM0273923 and MM0273924.
Why MiningSpares Metso C106 Jaw Plates
- Cast in our own foundry using premium Mn18Cr2 high manganese steel
- Heat treatment optimised for work-hardening under impact in primary crushing
- Precision machined to OEM drawing tolerances on back face and bolt-hole pattern
- Direct replacement for the original Metso parts MM0273923 and MM0273924
- Stock availability for standard C106 jaw plate sets in Mn18Cr2 grade
- Custom material grades available on request (Mn14, Mn22Cr2, modified manganese)
Compatible Equipment
Metso Nordberg C106 jaw crusher and similar Metso C-series primary jaw crushers. Drawing numbers covered on this page: MM0273923 (fixed jaw plate, 2 pieces per crusher set) and MM0273924 (swing jaw plate, 1 piece per crusher set).
Manufacturing Process
Our Metso C106 fixed and swing jaw plates are produced through water-glass sand casting, followed by a controlled heat treatment cycle to develop the work-hardening austenitic manganese structure. Each plate is then precision-machined on the back face, bolt-hole pattern and edge profile to ensure a perfect fit with the C106 jaw crusher frame and to match the original swing geometry of the machine.
Applications
Metso C106 jaw plates are used in primary crushing of granite, basalt, gneiss, quartzite, iron ore, copper ore, gold ore, limestone and other medium-hard to hard rock. Typical installations include hard rock mining operations, quarries, aggregate production, and construction and demolition recycling.
Related Crusher Wear Parts
Browse more high manganese crusher wear parts from MiningSpares:
- PYB1200 Bowl Liner and Mantle
- MX4 Bowl Liner C for Cone Crusher
- H8800 Hydrocone Liner
- Boratas SDK111 Jaw Plate Wear Parts
Request a Quotation
For pricing, lead time and material options on Metso C106 jaw plates MM0273923 and MM0273924, please use the Add to Enquiry button on this page or email us at [email protected]. Our sales team will respond within one business day.
The post C106 Jaw Plates – Fixed MM0273923 / Swing MM0273924 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post EL-Jay Rollercone RC54 Cone Crusher Wear Parts – Mantle & Bowl Liner appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>Items: Concave, Mantle, Concave Ring, Concave Segment, Bowl Liner, Cone Liner, Arm Guard, Distribution Plate
Casting Material: Austenitic Manganese Steel (Mn14, Mn14Cr2, Mn18Cr2, Mn22Cr2)
Casting Method: Water Glass Sand Casting
Applicable Material: Gravel, Granite, Basalt, Ore, Limestone, Sandstone, Quartz, Cobblestone
Applications: Mining, Quarry, Construction, Cement and Materials, Recycling
MiningSpares’ Cedarapids RC54 Bowl Liner and Mantle uses high-quality manganese alloys, including 13% Standard, 18% Premium, and 22% High alloys, to cater to diverse operational requirements and can be customized according to your needs
We also have various colors for you to choose from, red, blue, green, black, gray and so on
Rollercone RC54 Mantle & Bowl Liner Specifications
| No. | Name | Model | Item Code | weight |
| 1 | Mantle | RC54 | 02-540-363-7000 | 665kg |
| 2 | Bowl Liner | RC54 | 02-540-364-7000 | 775kg |
| 3 | Liner XC | Rollercone RC54 | 02-540-495-0000 | 825kg |
| 4 | Bowl Liner M | Rollercone RC54 | 02-540-488-0000 | 1160kg |
| 5 | Mantle | Rollercone RC54 | 02-540-022-0003 | 876kg |
| 6 | Bowl Liner | Rollercone RC54 | 02-540-023-0003 | 1050kg |
The manufacturing process is very rigorous to ensure a perfect fit with the Cedarapids RC54 Cone Crusher.
Our Rollercone RC54 Mantle & Bowl Liner wear parts are manufactured using advanced casting processes. During the manufacturing process, we strictly control material selection and process flow to ensure excellence in product quality and performance. We use high-quality alloy steel materials, combined with advanced casting technology, to ensure that the wear parts have excellent wear resistance and impact resistance. In addition, our production process includes precision machining and heat treatment processes to further improve the strength and durability of the liners.
For most of the world famous brands like Metso, Sandvik, Terex, Shanbao, Telsmith and so on
We all have a large inventory of original drawings, which helps us produce at a relatively low cost.
| Brand | Series | Crusher Model |
| Metso | Nordberg HP Cone Series | HP100, HP200, HP300, HP400, HP500, HP700, HP800 , HP900, HP3, HP4, HP5, HP6 |
| Nordberg GP Series | GP100, GP200, GP200S, GP300, GP300S, GP11F, GP500, GP550S, GP220, GP330, GP7 | |
| Nordberg MP Series | MP800, MP1000, MP1250, MP2250 | |
| Omnicone Multi Cylinder Series | 937SX, 1144SX, 1352, 1560, 937ST, 1352ST, 1144ST | |
| Sandvik | Cone Crusher CH series | CH420, CH430, CH440, CH830i, CH540, CH550, CH840i, CH660, CH860i, CH865, CH865i, CH870, CH870i, CH880, CH890 CH890i, CH895i |
| Cone Crusher CS series | CS420, CS430, CS440, CS840i, CS660 | |
| Superior Gyratory Cone Range | S2800, S3800, S4800, S6800 | |
| Kleemann | Mobicone Range | MCO9, MCO9i, MCO9s, MCO9si, MCO11, MCO11s, MCO11sx, MCO11 Pro, MCO13, MCO13s |
| Shanbao | PYB Series | PYB900, PYD900, PYZ900, PYB1200, PYD1200, PYZ1200, PYB1750, PYZ1750, PYD1750, PYB2200, PYZ2200, PYD2200 |
| PYFB Series | PYFB1325, PYFB1324, PYFB1321, PYFB1636, PYFB1626, PYFB1624, PYFB1620 | |
| PYFD Series | PYFD1313, PYFD1310, PYFD1308, PYFD1608, PYFD1607, PYFD1613, PYFD1614, PYFD1608, PYFD1607, PYFD1614 | |
| Symons | Cone Crusher FT series | 2FT, 3FT, 4FT, 4-1/4FT, 5-1/2FT, 7FT |
| Gyradisc Series | 36″, 48″, 66″ | |
| Terex | El-Jay Rollercone Range | ELJAY 45″, ELJAY 54″, ELJAY 66″ |
| Cedarapids | RC36, RC45 | |
| Cone Crusher TC/TG series | TC1000, TC1150, TC1300, TG120, TG220, TG320, TG420, TG820, TG1020, TC100SR, TC1400, TC1500 | |
| Cone Crusher TGS/MVP series | TGS120, TGS220, TGS320, TGS420, MVP380X, MVP450X, MVP550X, RC45III | |
| Cedar Rapids MVP Cone Range | MVP280, MVP380, MVP450, MVP550, MVP380X, MVP450X, MVP550X | |
| Telsmith | Cone Crusher T series | T200, T300,T400, T500, T900. |
| Gyrasphere Cone Series | 24″, 36″Std, 36FC, 38H, 44″, 48S”, 48FC | |
| Cone Crusher SBS/SBX series | SBS38, SBS44, SBS52, SBS57, SBS68, SBX44, SBX52, SBX57 | |
| Faco | Allis Chalmers Cone Series | 6-45, 7-60, 3-48, 3-84, 2-60, 10-60, 3-60 |
| Allis Chalmers Hydrocone Series | H2000, H3000, H4000, H6000, H7000, H8000, H36″, H51″ | |
| Svedala | Hydrocone Series | H2800, H3800, H4800, H6800, H7800, H8800, H51, H36 |
| Chyi Meang | Hydraulic Cone Series | PS2S , PC2S, PF2S, PC3S, PF3S, PC4S, PF4S, PSS2S |
| Minyu | Combined Cone Series | MCC1000, MCF1150, MCC1300, MCSS1300, MCC1370, MCC1500, MCS1500, MCC1680, MCF1680 |
| Hydraulic Cone Series | MSP100, MSP200, MSP300, MSP400 | |
| Kawasaki | RX Cone Series | RXC150, RXC220, RXC270 |
| Trio | TC Series | TC36, TC51, TC66, TC84 Standard & Shorthead |
| McColskey | Mobile Cone Series | C38, C44, C40, C50 |
| Sovient | KMD Series | KCD-600, KCD-900, KMD-1200, KMD-1750, KMD-2200, KSD-2200 |
| Kodiak | Cone Series | K200+ , k300+, K400+ |
| Sanme | SMH Series | SMH120, SMH180, SMH250DC, SMH350EC, SMH550, CC51 |
| Nakayama | Cone Series | NEM40H, NCC40H, NCSH42H, NSC200, NSC300, NSC400 |
| FLS midth | Raptor Cone Series | XL300, XL400, XL500, XL600, XL900, XL1100, XL1300, XL2000, XL410 |
| Liming SBM | Vipeak CS Series | CS75B, CS75D, CS160B, CS160D, CS240B, CS240D, CS400B, CS400D |
| Kefid HST Series | HST100, HST160, HST250, HST315, HST560, HST750 | |
| Zenith | HPT/HPC Series | HPT100, HPT200, HPT300, HPT400, HPT500, HPT800, HPC220, HPC400 |
| Other Brand and customized drawings kindly contact with us for [email protected] | ||
Related Cone Crusher Wear Parts
Browse more high manganese cone crusher wear parts from MiningSpares:
- PYB1200 Bowl Liner and Mantle
- MX4 Bowl Liner C for Cone Crusher
- H8800 Hydrocone Liner
- Cone Crusher Wear Parts BG00523226
The post EL-Jay Rollercone RC54 Cone Crusher Wear Parts – Mantle & Bowl Liner appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>- TRIO17052179 — Swing Jaw Plate — 2,857 kg
- TRIO17052178 — Fixed Jaw Plate — 2,990 kg
- TRIO17003911 — Wedge Die, Swing LH — 50.8 kg
- TRIO17003912 — Wedge Die, Swing RH — 50.8 kg
- TRIO17003942 — Low Cheek Plate, LH — 271 kg
- TRIO17003941 — Upper Cheek Plate, RH — 387 kg
- TRIO17003948 — Wedge Block
The post Full Set of Jaw Plates Cheek plates Wedges For CT4254 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>Equipment Overview
The TRIO CT4254 is a heavy-duty single-toggle jaw crusher widely used in mining, quarrying, aggregate production, and recycling for primary and secondary crushing of hard rock, ores, and demolition material. Its robust cast-steel frame and high-inertia eccentric shaft deliver consistent throughput under continuous duty.
The crushing chamber is formed by two opposing wear surfaces — the fixed jaw (stationary) and the swing jaw (reciprocating). Material is compressed and fractured between them on every stroke. Surrounding these liners, a set of supporting and clamping components keeps the wear parts seated, aligned, and tensioned so the crusher runs safely at full capacity. The seven parts listed below cover the complete wear and structural interface set for the CT4254 jaw module:
- Fixed Jaw & Swing Jaw – the primary crushing surfaces (manganese liners).
- Wedge Die, Swing (LH/RH) – clamps and locks the swing jaw liner to the swing jaw body.
- Upper / Lower Cheek Plates (RH/LH) – side liners that protect the crusher frame from abrasion.
- Wedge Block (TRIO17003948) – the hold-down / tension component that maintains liner position and crushing gap.
Available Parts List
| No. | Part Name | Part Number | Model | Function | Weight (kg) |
|---|---|---|---|---|---|
| 1 | Swing Jaw Plate | TRIO17052179 | CT4254 | Movable crushing surface mounted on the swing jaw; the high-impact wear liner that does most of the comminution work. | 2,857 |
| 2 | Fixed Jaw Plate | TRIO17052178 | CT4254 | Stationary crushing surface; the fixed wear liner against which rock is compressed and fractured. Directly determines product shape and reduction ratio. | 2,990 |
| 3 | Wedge Die, Swing LH | TRIO17003911 | CT4254 | Left-hand clamping wedge that locks the swing jaw liner firmly against the swing jaw body, maintaining crushing force and preventing liner movement. | 50.8 |
| 4 | Wedge Die, Swing RH | TRIO17003912 | CT4254 | Right-hand clamping wedge that locks the swing jaw liner firmly against the swing jaw body, maintaining crushing force and preventing liner movement. | 50.8 |
| 5 | Low Cheek Plate, LH | TRIO17003942 | CT4254 | Left-hand lower side liner protecting the frame at the discharge side; replacement restores proper chamber alignment. | 271 |
| 6 | Upper Cheek Plate, RH | TRIO17003941 | CT4254 | Right-hand upper side liner that shields the crusher frame from abrasive material flow, extending frame service life. | 387 |
| 7 | Wedge Block | TRIO17003948 | CT4254 | Hold-down / tension block that maintains liner position and crushing gap, securing the wear parts under operational load. |
Material & Manufacturing
All wear liners in this set are produced from high-manganese steel (Mn13 / Mn18Cr2) selected for its work-hardening behaviour — the surface grows harder under impact, giving excellent abrasion resistance in hard-rock service. Cheek plates and wedge components use cast carbon / low-alloy steel with precision machining for accurate fit.
Manufacturing follows a controlled process route:
- Pattern & casting – resin sand moulding with controlled chemistry and pouring.
- Heat treatment – water quenching and tempering to develop the required hardness and toughness.
- Machining & inspection – critical faces and bolt holes machined to drawing; dimensions, hardness, and surface checked.
- QC release – only parts passing inspection are packed and shipped.
OEM Quality Assurance
- Built to Original Specifications – manufactured to TRIO CT4254 drawings for 100% interchangeability with the genuine parts.
- Material Traceability – heat / batch numbers recorded; material test reports available on request.
- Strict Quality Control – dimensional, hardness, and surface inspection on every batch before release.
- Field-Proven Reliability – supplied to mining and aggregate operations across multiple continents.
Inquiry, Lead Time & Warranty
- Pricing – quote provided on inquiry; volume and repeat-order discounts available.
- Lead Time – typical 2–4 weeks depending on quantity and current foundry schedule.
- Shipping – seaworthy export packaging; worldwide delivery by sea or air.
- Warranty – 12 months against manufacturing defects.
- Customization – non-standard sizes, materials, or drawings can be produced on request.
FAQ
Q: Are these parts interchangeable with the original TRIO CT4254?
A: Yes. All parts are manufactured to original equipment drawings and are fully interchangeable with genuine TRIO CT4254 components.
Q: What is the typical lead time?
A: Standard items ship in 2–4 weeks; urgent orders can be discussed case by case.
Q: Can you supply parts to our own drawings or specifications?
A: Yes. We produce both standard and custom wear parts; send your drawing, sample, or part number and we will quote.
Q: Do you provide technical support for installation?
A: Yes. Layout drawings and fitting guidance are available; our engineers can advise on liner change-out and chamber setup.
Request a Quote for TRIO CT4254 Parts
.parts-table { width:100%; border-collapse:collapse; margin:16px 0; }
.parts-table th, .parts-table td { border:1px solid #ddd; padding:8px 10px; text-align:left; vertical-align:top; }
.parts-table th { background:#f5f5f5; font-weight:600; }
.parts-table tr:nth-child(even) { background:#fafafa; }
.button { display:inline-block; background:#c0392b; color:#fff !important; padding:12px 24px; border-radius:4px; text-decoration:none; font-weight:600; }
@media (max-width:768px) { .parts-table { display:block; overflow-x:auto; white-space:nowrap; } }
The post Full Set of Jaw Plates Cheek plates Wedges For CT4254 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Fixed and Swing Crushing Jaw 2419250 2419252 suit Kleemann MC11O Ri EVO appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>Product Overview
Function & Application
Quality & Installation
Product Advantages
| No. | Item Name | Parts Number | Crusher Model | Weight (kg) | Drawing | Mould |
| 1 | Moving Crusher Jaw RT-Expert | 2419250 | MC 110 Ri EVO | 1,370 | Yes | Yes |
| 2 | Fixed Crusher Jaw RT-Expert | 2419252 | MC 110 Ri EVO | 1,172 | Yes | Yes |
| 3 | Cheek Plate Upper RT-Expert | 2242112 | MC 110 Ri EVO | 130 | Yes | Yes |
| 4 | Lower Left Side Plate | 2242120 | MC 110 Ri EVO | 110 | Yes | Yes |
| 5 | Cheek Plate Upper L | 2242111 | MC 110 Ri EVO | 130 | Yes | Yes |
| 6 | Lower Right Side Plate | 2242115 | MC 110 Ri EVO | 110 | Yes | Yes |
The post Fixed and Swing Crushing Jaw 2419250 2419252 suit Kleemann MC11O Ri EVO appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Fixed Jaw Plate Long and Swing Jaw Plate Long Suit SBM C6X145 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>Product Overview
Function & Application
Quality & Installation
Product Advantages
| No. | Item Name | Parts Number | Crusher Model | Weight (kg) | Drawing | Mould |
| 1 | Fixed Jaw Plate long | 11006003115-L | C6X145 | 4,450 | Yes | Yes |
| 2 | Swin Jaw Plate long | 11006003118-L | C6X145 | 2,920 | Yes | Yes |
The post Fixed Jaw Plate Long and Swing Jaw Plate Long Suit SBM C6X145 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Fix Jaw plate and Swing Jaw plate suit Drobmash ДРО-609А Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>Product Overview
Function & Application
Quality & Installation
Product Advantages
| No. | Item Name | Parts Number | Crusher Model | Weight (kg) | Drawing | Mould |
| 1 | Movable jaw plate | 1060900012 | ДРО 609А | 1,591 | Yes | Yes |
| 2 | Fixed Jaw Plate | 1060902014 | ДРО 609А | 1,442 | Yes | Yes |
The post Fix Jaw plate and Swing Jaw plate suit Drobmash ДРО-609А Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>