Russian Crusher archivos - Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts https://miningspareparts.com/es/brand/crushers/russian-crusher/ Mining Wear & Spare Parts Supplier Thu, 08 Oct 2026 06:43:30 +0000 es hourly 1 https://wordpress.org/?v=7.1.3 https://miningspareparts.com/wp-content/uploads/2026/08/cropped-logo正方形-32x32.webp Russian Crusher archivos - Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts https://miningspareparts.com/es/brand/crushers/russian-crusher/ 32 32 3440.02.010 / 3440.02.020 / 3440.01.110 Jaw Plates for Russian SMD111 Crusher https://miningspareparts.com/es/producto/smd-111-jaw-plates/ Mon, 31 Aug 2026 02:55:42 +0000 https://miningspareparts.com/en/product/smd-111-jaw-plates/ High-manganese swing and fixed jaw plates for the СМД-111 (SMD111) jaw crusher. Drawing numbers 3440.02.010 (961 kg), 3440.02.020 (960 kg) and 3440.01.110 (840 kg). Mn18% cast, heat-treated and machined for direct fitment.

The post 3440.02.010 / 3440.02.020 / 3440.01.110 Jaw Plates for Russian SMD111 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

]]> СМД-111 (SMD111) Jaw Crusher Wear Parts – Swing & Fixed Jaw Plates

High-manganese swing and fixed jaw plates manufactured by MiningSpares for the СМД-111
(SMD111) jaw crusher – the Russian-built primary jaw crusher also designated
ЩДП-9х12 and originally produced by Volgotsemmash (ОАО «Волгоцеммаш»).
The set consists of three cast manganese plates that form the primary crushing chamber: an upper and a lower
swing (movable) jaw plate running on the pitman, plus the stationary fixed jaw plate. Each plate is cast,
heat-treated and machined to drawing for direct replacement, with no frame modification required.

СМД-111 Jaw Plate Specification Table

No. Drawing No. Nombre Material Peso (kg)
1 3440.02.010 Swing Jaw Plate (Upper) / Movable Jaw Plate Upper Mn18% 961
2 3440.02.020 Swing Jaw Plate (Lower) / Movable Jaw Plate Lower Mn18% 960
3 3440.01.110 Fixed Jaw Plate 2P / Stationary Jaw Plate Mn18% 840
Total set weight 2,761

Item 3 (3440.01.110) is a 2-piece (2P) fixed jaw plate design.

Material & Casting Process

All three plates are cast in Mn18% high-manganese steel (austenitic manganese steel,
equivalent to ASTM A128 Grade B2 / GOST 977-88 grade 110Г13Л) using water-glass sand casting. Each casting
is solution heat-treated (water quenched) to deliver a fully austenitic structure, then precision-machined on
all mating and seating faces so it seats correctly against the СМД-111 crusher frame and pitman.

  • As-cast hardness: HB 200–220
  • Work-hardened surface hardness in service: HB 450+
  • Key benefit: the more the plate is impacted, the harder the working surface becomes –
    ideal for the high-compression duty of a primary jaw chamber

Machine Data – СМД-111 (ЩДП-9х12)

For fitment confirmation, the host machine data published by the original manufacturer:

  • Designation: СМД-111 / ЩДП-9х12
  • Feed opening (width × length): 900 × 1200 mm
  • Maximum feed lump size: 750 mm
  • Overall dimensions (L × W × H): 4,942 × 3,150 × 3,300 mm (excluding drive)
  • Machine mass (less components): 54.3 t
  • Application: primary crushing of granite, basalt, quartzite, sandstone, limestone and ores
    with a compressive strength up to 300 MPa

Aplicaciones

СМД-111 jaw plates are used for primary crushing in hard-rock mining, quarry and aggregate production,
and construction-recycling duties – typically granite, gabbro, basalt and diabase duty in Russian and
CIS crushing plants.

Frequently Asked Questions

Q1. What material grade are the plates supplied in?
Mn18% high-manganese steel as standard. Mn18Cr2 and Mn13Cr2 are available on request for highly abrasive
or high-impact duties.

Q2. Can I buy a single plate rather than the full set?
Yes. Each of the three plates can be ordered separately – just quote the drawing number(s) from the table
above when enquiring.

Q3. What is the lead time?
Machined plates from stock: 7–10 working days. Fresh castings: 25–35 days. Breakdown orders can be
expedited and shipped by airfreight.

Q4. What documentation is supplied?
Every shipment includes spectrometer chemical-composition report, hardness test report and dimensional
inspection report. Third-party inspection (SGS, BV, TÜV) can be arranged on request.

Q5. Is this an OEM part?
No. These are aftermarket replacement parts manufactured by MiningSpares to the original drawings. They are
not affiliated with, or endorsed by, the original equipment manufacturer.

Request a Quotation

For pricing, lead time and alternative material grades on СМД-111 (SMD111) jaw plates, use the
Añadir a la consulta button on this page or email us at
[email protected]. Our sales team responds within one business day.

The post 3440.02.010 / 3440.02.020 / 3440.01.110 Jaw Plates for Russian SMD111 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

]]> Fix Jaw plate and Swing Jaw plate suit Drobmash ДРО-609А Crusher https://miningspareparts.com/es/producto/dr%d0%be-609%d0%b0-parts/ Thu, 30 Jul 2026 04:24:15 +0000 https://miningspareparts.com/?post_type=product&p=12872
  • Fixed Jaw Plate (1,442kg) is specially designed for ДРО 609А Jaw Crusher.
  • Swing Jaw Plate (1,591kg) matches ДРО 609А crusher perfectly.
  • Model：Drobmash Dro-609A Jaw Crusher Side Plates, Jaw Plate
  • Material:Mn13cr2/ Mn18cr2
  • Patten: Ready Pattern
  • Standard Lead Time: 20days

    • The post Fix Jaw plate and Swing Jaw plate suit Drobmash ДРО-609А Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>

    Nombre
    Product Overview

    Fixed Jaw Plate and Swing Jaw Plate are key spare parts for ДРО 609А Jaw Crusher. The fixed jaw plate weighs 1,442kg, and the swing jaw plate weighs 1591kg. The two components form the main crushing cavity of the equipment. They endure continuous friction and impact during material processing. They are crafted from premium wear-resistant alloy materials. They are widely used in mining, quarrying and aggregate production. They are indispensable replacements for routine equipment maintenance.

    Function & Application

    Fixed Jaw Plate stays stationary to form a firm crushing surface. Swing Jaw Plate swings back and forth to squeeze stones and ores. The two parts cooperate to finish the whole crushing process. They protect the crusher main body from abrasion and damage. They keep steady output under long-term heavy load. They perform well in various harsh working environments. Timely replacement helps prevent unexpected production shutdown.

    Quality & Installation

    All jaw plates follow strict OEM manufacturing standards. Every product undergoes full quality checks before delivery. Precise machining ensures perfect compatibility with ДРО 609А Jaw Crusher. Users can install them directly with no extra modification. The installation steps are simple and save maintenance time. Solid structure improves compression resistance and service life. They maintain stable performance for long continuous operation.

    Ventajas del producto

    These jaw plates deliver outstanding wear resistance and long service life. They reduce replacement frequency and cut overall maintenance costs. They keep ДРО 609А Jaw Crusher running at high efficiency. They lower the risk of equipment faults on production sites. They are reliable and cost-effective aftermarket parts. They gain wide recognition among crusher industry users.

    ​​

    No. Nombre del artículo Parts Number Modelo de trituradora Peso (kg) Dibujo Mould
    1 Movable jaw plate 1060900012 ДРО 609А 1,591 Sí Sí
    2 Placa de mandíbula fija 1060902014 ДРО 609А 1,442 Sí Sí

    ​

    The post Fix Jaw plate and Swing Jaw plate suit Drobmash ДРО-609А Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>         Fixed Jaw Plate and Swing Jaw Plate suit СМ-16Д Jaw Crusher https://miningspareparts.com/es/producto/smd16_jaw_plate/ Thu, 11 Jun 2026 08:06:06 +0000 https://miningspareparts.com/?post_type=product&p=12530
  • Fixed Jaw Plate (707kg) is specially designed for СМ-16Д Jaw Crusher.
  • Swing Jaw Plate (715kg) matches СМ-16Д crusher perfectly.
  • Model：CM-16Д
  • Material:High Manganese Steel
  • Patten: Ready Pattern
  • Standard Lead Time: 30days

    • The post Fixed Jaw Plate and Swing Jaw Plate suit СМ-16Д Jaw Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>

    Product Overview

    Fixed Jaw Plate and Swing Jaw Plate are key spare parts for СМ-16Д Jaw Crusher. The fixed jaw plate weighs 707kg, and the swing jaw plate weighs 715kg. The two components form the main crushing cavity of the equipment. They endure continuous friction and impact during material processing. They are crafted from premium wear-resistant alloy materials. They are widely used in mining, quarrying and aggregate production. They are indispensable replacements for routine equipment maintenance.

    Function & Application

    Fixed Jaw Plate stays stationary to form a firm crushing surface. Swing Jaw Plate swings back and forth to squeeze stones and ores. The two parts cooperate to finish the whole crushing process. They protect the crusher main body from abrasion and damage. They keep steady output under long-term heavy load. They perform well in various harsh working environments. Timely replacement helps prevent unexpected production shutdown.

    Quality & Installation

    All jaw plates follow strict OEM manufacturing standards. Every product undergoes full quality checks before delivery. Precise machining ensures perfect compatibility with СМ-16Д Jaw Crusher. Users can install them directly with no extra modification. The installation steps are simple and save maintenance time. Solid structure improves compression resistance and service life. They maintain stable performance for long continuous operation.

    Ventajas del producto

    These jaw plates deliver outstanding wear resistance and long service life. They reduce replacement frequency and cut overall maintenance costs. They keep СМ-16Д Jaw Crusher running at high efficiency. They lower the risk of equipment faults on production sites. They are reliable and cost-effective aftermarket parts. They gain wide recognition among crusher industry users.
    No. Nombre del artículo Parts Number Modelo de trituradora Peso (kg)
    1 Placa de mandíbula fija 162-0-1 CM-16Д 707
    2 Placa de mandíbula giratoria 162-2-1 CM-16Д 715

    The post Fixed Jaw Plate and Swing Jaw Plate suit СМ-16Д Jaw Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>         1121.01.256 Jaw plate suit Uralmash SHDP1500/2100 Double Toggle Jaw Crusher https://miningspareparts.com/es/producto/uralmash_jaw_plate/ Wed, 03 Jun 2026 08:59:18 +0000 https://miningspareparts.com/?post_type=product&p=12510
  • Jaw Plate fits Uralmash SHDP1500/2100 Double Toggle Jaw Crusher.
  • Single piece weight reaches 665KGS with solid thick structure.
  • Model: Uralmash SHDP 1500x2100
  • Material: High Manganese Alloy Steel
  • Patten: Ready Pattern
  • Standard Lead Time: 30days

    • The post 1121.01.256 Jaw plate suit Uralmash SHDP1500/2100 Double Toggle Jaw Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>

    Product Overview

    Jaw Plate is vital wear component for Uralmash SHDP1500/2100 Double Toggle Jaw Crusher. The product weighs 665KGS per piece with heavy-duty structural design. It installs on fixed or swing jaw body to form crushing cavity. It bears continuous stone impact and friction in daily crushing work. It applies widely in mine exploitation, quarry and aggregate processing field. Standard dimensional design ensures good interchangeability with original spare parts.

    Main Function

    This jaw plate directly contacts raw ores and stones during crushing. It squeezes bulk feed into required granular finished materials. It protects the base jaw body from severe abrasion damage. Stable structural performance keeps consistent crusher production capacity. It supports long-time continuous running under high-load working conditions. Timely replacement of worn jaw plate avoids unexpected equipment halt.

    Quality & Installation

    Our jaw plate is cast from premium high manganese alloy raw material. All items pass strict dimension and hardness inspection before shipment. Strict OEM production standard ensures accurate matching with SHDP1500/2100 model. Operators can finish installation without extra cutting or modification. Compact mounting structure shortens on-site replacement time effectively. Reliable internal texture improves overall compression and shock resistance.

    Ventajas del producto

    Heavy 665KGS jaw plate owns outstanding durability and long service cycle. It reduces frequent part replacement and lowers long-term operating cost. It helps Uralmash SHDP1500/2100 jaw crusher keep steady crushing efficiency. It decreases breakdown probability caused by rapid liner wear. It is cost-effective aftermarket spare part for global crusher end users and maintenance suppliers.
    No. Código del artículo Nombre del artículo Descripción CANT Peso
    1 1121.04.01/8811-01 Front Toogle Plate Uralmash SHDP1500_2100 2 Pc(s) 2,216
    2 1121.04.02/8812-01Г Rear Toogle Plate Uralmash SHDP1500_2100 4 Pc(s) 1,226
    3 1121.01.256/8801-01 Jaw Plate (8pcs/Set) Uralmash SHDP1500_2100 12 Pc(s) 665

    The post 1121.01.256 Jaw plate suit Uralmash SHDP1500/2100 Double Toggle Jaw Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>         1277.07.316 Mantle & 1277.05.311 Concave for KMD-1750 Cone Crusher https://miningspareparts.com/es/producto/kmd-1750-parts/ Thu, 15 Jan 2026 06:56:31 +0000 https://miningspareparts.com/?post_type=product&p=12314
    • Product Name:Mantle
    • Part No.:1277.07.316
    • Weight:1465 kg
    • Product Name:Concave
    • Part No.:1277.05.311
    • Weight:1639 kg
    • Model：КМД-1750
    • Mantle 1277.07.316 КМД-1750 weighs 1465kg; Concave 1277.05.311 КМД-1750 weighs 1639kg.
    • Both are dedicated wear parts for КМД-1750 series Cone Crusher.
    • Mantle delivers rotational crushing force; Concave forms stable crushing chamber.
    • Precision-machined to OEM specs for direct replacement with zero modification.：Rigorously tested for hardness and durability, meets industrial crushing standards.

    The post 1277.07.316 Mantle & 1277.05.311 Concave for KMD-1750 Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>
    Mantle 1277.07.316 КМД-1750 and Concave 1277.05.311 КМД-1750 are core wear components for КМД-1750 Cone Crusher. They are essential for efficient crushing of hard materials like granite, ore and basalt. As key parts of the crushing system, their performance directly affects the crusher’s output and operational stability, making them critical for mining, quarrying and aggregate processing industries.
    Número de pieza
    Product Name
    Modelo
    Peso
    1277.07.316
    Manto
    КМД-1750
    1465 kg
    1277.05.311
    Cóncavo
    КМД-1750
    1639 kg

    The Mantle 1277.07.316 КМД-1750 weighs 1465kg and serves as the dynamic crushing part. It rotates at high speed to exert impact force on materials, with high-manganese steel construction resisting abrasion and deformation. The Concave 1277.05.311 КМД-1750, weighing 1639kg, acts as the stationary part of the crushing chamber. It works with the mantle to compress and crush materials, and its robust structure ensures long service life even under heavy-duty operations.

    Both parts are manufactured to strict OEM standards using advanced CNC machining technology. This ensures precise dimensions and seamless fit with КМД-1750 Cone Crusher, eliminating the need for on-site adjustments or modifications. Each unit undergoes rigorous pre-shipment testing, including hardness measurement, dimensional inspection and impact resistance trials, to ensure compliance with international industrial standards and reliable performance in harsh working conditions.

    These parts are ideal for both routine maintenance and emergency replacement. Their durable build and perfect fit not only boost crusher efficiency but also reduce unplanned downtime and operational costs. By choosing these premium КМД-1750 cone crusher parts, you can extend the equipment’s overall lifespan and maintain consistent crushing performance, providing a cost-effective solution for your maintenance needs.

    The post 1277.07.316 Mantle & 1277.05.311 Concave for KMD-1750 Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>         Mantle 1298.55.05 and Concave1298.07.44 for Uralmash KSD3000 Cone Crusher https://miningspareparts.com/es/producto/mantle-12985505-and-concave12980744/ Fri, 21 Nov 2025 09:03:07 +0000 https://miningspareparts.com/?post_type=product&p=12011 Kit Details (2 Pairs of Concave & Mantle)
    Part Number 1: 1298.55.05 | Weight Options: 5035 kg, 5040 kg
    Part Number 2: 1298.07.44 | Weight Options: 5090 kg, 5200 kg
    Product Name: Concave and Mantle 1298.55.05 / 1298.07.44
    Compatible Equipment: Cone Crusher
    Core Advantages: High-hardness alloy steel, wear-resistant, impact-resistant, precise fit, long service life
    Core Function: Forms crushing chamber for Cone Crusher, crushing mineral/rock materials efficiently

    The post Mantle 1298.55.05 and Concave1298.07.44 for Uralmash KSD3000 Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>     El kit de cóncavo y manto 1298.55.05 / 1298.07.44 es un componente de trituración crítico diseñado exclusivamente para la trituradora de cono. Satisface las demandas de alto impacto y abrasión de las operaciones de procesamiento de minerales.
    Fabricadas con acero de aleación de alto cromo y superficie tratada térmicamente, cada par ofrece una excepcional resistencia al desgaste. El cóncavo (mandíbula fija) y el manto (mandíbula giratoria) forman una cámara de trituración precisa que garantiza un tamaño uniforme de las partículas. A continuación se muestra la tabla de especificaciones detallada de cada pieza:
    Descripción de la mercancía Número de pieza Componente C-dad (PCS) N.W. para cada uno (KGS) N.O Total (KGS) Número de paquete N.W (KGS)
    1298.55.05 Manto 1 5035 5035 1 5035
    1298.55.05 Manto 1 5040 5040 1 5040
    1298.07.44 Cóncavo 1 5090 5090 1 5090
    1298.07.44 Cóncavo 1 5200 5200 1 5200
    El cóncavo y el manto 1298.55.05 ofrecen opciones de 5035kg/5040kg, mientras que el 1298.07.44 proporciona 5090kg/5200kg para diferentes requisitos de carga. Su revestimiento resistente a la corrosión protege contra la humedad y los restos de mineral, prolongando la vida útil en 40% frente a las piezas estándar. Cada unidad se somete a estrictos controles de calidad ISO 9001, incluidas pruebas de dureza (HRC 60-65) y resistencia al impacto. Las piezas encajan perfectamente en la mayoría de los conjuntos de trituradoras de cono estándar con puntos de montaje intercambiables.
    La instalación es sencilla, lo que reduce el tiempo de inactividad por mantenimiento. Respaldado por una garantía de 12 meses, este kit es una solución rentable para empresas mineras, plantas de áridos y talleres de trituración. El cóncavo y el manto 1298.55.05 / 1298.07.44 garantizan un rendimiento de trituración eficiente, minimizando las interrupciones operativas y maximizando la productividad de la trituradora de cono.

    The post Mantle 1298.55.05 and Concave1298.07.44 for Uralmash KSD3000 Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>         2102.67-13.0- 002 Mantle and 2102.67-3.00-002 Concave Suit FKB2120 Cone Crusher https://miningspareparts.com/es/producto/fkb2120-cone-liner/ Wed, 18 Sep 2024 06:42:27 +0000 https://miningspareparts.com/?post_type=product&p=10632 Nombres de los artículos: Cóncavo, Manto, Anillo Cóncavo, Segmento Cóncavo, Revestimiento de Tazón, Revestimiento de Cono, Guardabrazos, Placa de Distribución, Manto Inferior, Manto Superior

    Modelo: FKB2120     Pesos: 476kgs, 2315kgs, 2437kgs       Código del artículo:  2102.67-13.0-002 ,2102.67-13.0-001,2102.67-3.0-002

    Material de fundición:  M13Cr2, Mn18Cr2, Mn22Cr2

    Material aplicable: Grava, Granito, Basalto, Mineral, Caliza, Arenisca, Quatz, Adoquín

    Aplicaciones: Minería, canteras, construcción, cemento y materiales, reciclaje

    The post 2102.67-13.0- 002 Mantle and 2102.67-3.00-002 Concave Suit FKB2120 Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>     MiningSpares tiene larga comprensión y cobertura Trituradoras de cono coinciden ，.He aquí una descripción del FKB2120 Mantle and bowl liner.

    El revestimiento del manto y la cuba FKB2120 de MiningSpares utiliza aleaciones de manganeso de alta calidad, incluidas las aleaciones 13% Standard, 18% Premium y 22% High, para satisfacer diversos requisitos operativos y se puede personalizar según sus necesidades.
    También tenemos varios colores para que usted elija, rojo, azul, verde, negro, gris y así sucesivamente

    No. Nombre Modelo Código del artículo pesos/kg
    1 Manto Superior FKB 2120 2102.67-13.0-002 476
    2 Manto Inferior FKB 2120 2102.67-13.0-001 2315
    3 Cóncavo FKB 2120 2102.67-3.0-002 2437

    El proceso de fabricación es muy estricto para garantizar un ajuste perfecto con la máquina.

     

    El manto y la camisa de cuba FKB2120 de MiningSpares se fabrican mediante avanzados procesos de fundición. Durante el proceso de fabricación, controlamos estrictamente la selección de materiales y el flujo del proceso para garantizar la excelencia en la calidad y el rendimiento del producto. Utilizamos materiales de acero aleado de alta calidad combinados con una avanzada tecnología de fundición para garantizar que nuestros productos tengan una excelente resistencia al desgaste y a los impactos. Además, nuestro proceso de fabricación incluye procesos de mecanizado de precisión y tratamiento térmico para mejorar aún más la resistencia y la durabilidad.

    Para la mayoría de marcas de renombre mundial como Mettso, Sandvick, Terex, Shanbao, Telsmith, etc.
    Todos tenemos un gran inventario de dibujos originales, lo que nos ayuda a producir a un coste relativamente bajo.

    Marca Serie Modelo de trituradora
    Mettso Serie de conos Nordberg HP HP100, HP200, HP300, HP400, HP500, HP700, HP800 , HP900, HP3, HP4, HP5, HP6
    Serie GP de Nordberg GP100, GP200, GP200S, GP300, GP300S, GP11F, GP500, GP550S, GP220, GP330, GP7
    Nordberg Serie MP MP800, MP1000, MP1250, MP2250
    Serie multicilindro Omnicone 937SX, 1144SX, 1352, 1560, 937ST, 1352ST, 1144ST
    Sandvick Trituradora de cono serie CH CH420, CH430, CH440, CH830i, CH540, CH550, CH840i, CH660, CH860i, CH865, CH865i, CH870, CH870i, CH880, CH890 CH890i, CH895i
    Trituradora de cono serie CS CS420, CS430, CS440, CS840i, CS660
    Gama superior de conos giratorios  S2800, S3800, S4800, S6800
    Kleemann Gama Mobicone MCO9, MCO9i, MCO9s, MCO9si, MCO11, MCO11s, MCO11sx, MCO11 Pro, MCO13, MCO13s
    Shanbao Serie PYB PYB900, PYD900, PYZ900, PYB1200, PYD1200, PYZ1200, PYB1750, PYZ1750, PYD1750, PYB2200, PYZ2200, PYD2200
    Serie PYFB PYFB1325, PYFB1324, PYFB1321, PYFB1636, PYFB1626, PYFB1624, PYFB1620
    Serie PYFD  PYFD1313, PYFD1310, PYFD1308, PYFD1608, PYFD1607, PYFD1613, PYFD1614, PYFD1608, PYFD1607, PYFD1614
    Symons Trituradora de cono serie FT 2 PIES, 3 PIES, 4 PIES, 4-1/4 PIES, 5-1/2 PIES, 7 PIES
    Serie Gyradisc 36″,  48″,  66″
    Terex Gama Rollercone El-Jay ELJAY 45″, ELJAY 54″, ELJAY 66″
    Cedarapids RC36, RC45
    Trituradora de cono serie TC/TG TC1000, TC1150, TC1300, TG120, TG220, TG320, TG420, TG820, TG1020, TC100SR, TC1400, TC1500
    Trituradora de cono serie TGS/MVP TGS120, TGS220, TGS320, TGS420, MVP380X, MVP450X, MVP550X, RC45III
    Gama de conos MVP Cedar Rapids MVP280, MVP380, MVP450, MVP550, MVP380X, MVP450X, MVP550X
    Telsmith Trituradora de cono serie T T200, T300,T400, T500, T900.
    Serie Gyrasphere Cone 24″, 36″Std, 36FC, 38H, 44″, 48S", 48FC
    Trituradora de cono serie SBS/SBX SBS38, SBS44, SBS52, SBS57, SBS68, SBX44, SBX52, SBX57
    Faco Serie de conos Allis Chalmers 6-45,  7-60,  3-48, 3-84,  2-60,  10-60,  3-60
    Serie Hydrocone de Allis Chalmers H2000, H3000, H4000, H6000, H7000, H8000, H36″, H51
    Svedala  Serie Hydrocone H2800, H3800, H4800, H6800, H7800, H8800, H51, H36
    Chyi Meang Serie de conos hidráulicos PS2S , PC2S, PF2S, PC3S, PF3S, PC4S, PF4S, PSS2S
    Minyu Serie de conos combinados MCC1000, MCF1150, MCC1300, MCSS1300, MCC1370, MCC1500, MCS1500, MCC1680, MCF1680
    Serie de conos hidráulicos MSP100, MSP200, MSP300, MSP400
    Kawasaki Serie RX Cone RXC150, RXC220, RXC270
    Trío Serie TC TC36, TC51, TC66, TC84 Estándar y cabeza corta
    McColskey Serie de conos móviles C38, C44, C40, C50
    Sovient Serie KMD KCD-600, KCD-900, KMD-1200, KMD-1750, KMD-2200, KSD-2200
    Kodiak Serie cónica K200+ , k300+, K400+
    Sanme Serie SMH SMH120, SMH180, SMH250DC, SMH350EC, SMH550, CC51
    Nakayama Serie cónica NEM40H, NCC40H, NCSH42H, NSC200, NSC300, NSC400
    FLS medio Serie Raptor Cone XL300, XL400, XL500, XL600, XL900, XL1100, XL1300, XL2000, XL410
    Liming SBM Vipeak Serie CS CS75B, CS75D, CS160B, CS160D, CS240B, CS240D, CS400B, CS400D
    Kefid Serie HST HST100, HST160, HST250, HST315, HST560, HST750
    Zenith Serie HPT/HPC HPT100, HPT200, HPT300, HPT400, HPT500, HPT800, HPC220, HPC400
    Otras marcas y dibujos personalizados por favor póngase en contacto con nosotros para [email protected]

    The post 2102.67-13.0- 002 Mantle and 2102.67-3.00-002 Concave Suit FKB2120 Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>         1286.05.411-1 Lower Mantle and 1286.05.414-1 Upper Mantle Suit Uralmash KSD3000/1500 Cone Crusher https://miningspareparts.com/es/producto/ksd3000-lower-and-upper-mantle-1286-05-411-1/ Thu, 22 Aug 2024 05:24:30 +0000 https://miningspareparts.com/?post_type=product&p=10493 Nombres de los artículos: Cóncavo, Manto, Anillo Cóncavo, Segmento Cóncavo, Revestimiento de Tazón, Revestimiento de Cono, Guardabrazos, Placa de Distribución, Manto Inferior, Manto Superior

    Modelo: KSD3000      Pesos: 6016kgs, 1.801kgs      Código del artículo: 1286.05.411-1,1286.05.414-1

    Material de fundición:  M13Cr2, Mn18Cr2, Mn22Cr2

    Material aplicable: Grava, Granito, Basalto, Mineral, Caliza, Arenisca, Quatz, Adoquín

    Aplicaciones: Minería, canteras, construcción, cemento y materiales, reciclaje

    The post 1286.05.411-1 Lower Mantle and 1286.05.414-1 Upper Mantle Suit Uralmash KSD3000/1500 Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>     MiningSpares tiene larga comprensión y cobertura Trituradoras de cono coinciden ，.Aquí encontrará una descripción del manto inferior y superior KSD3000.

    MiningSpares’ KSD3000 Lower and Upper Mantle uses high-quality manganese alloys, including 13% Standard, 18% Premium, and 22% High alloys, to cater to diverse operational requirements and can be customized according to your needs
    También tenemos varios colores para que usted elija, rojo, azul, verde, negro, gris y así sucesivamente

    El proceso de fabricación es muy estricto para garantizar un ajuste perfecto con la máquina.

     

    MiningSpares’KSD3000 Lower and Upper Mantle are manufactured using advanced casting processes. During the manufacturing process, we strictly control material selection and process flow to ensure excellence in product quality and performance. We use high quality alloy steel materials combined with advanced casting technology to ensure that our products have excellent wear and impact resistance. In addition, our manufacturing process includes precision machining and heat treatment processes to further enhance strength and durability

    Para la mayoría de marcas de renombre mundial como Mettso, Sandvick, Terex, Shanbao, Telsmith, etc.
    Todos tenemos un gran inventario de dibujos originales, lo que nos ayuda a producir a un coste relativamente bajo.

    Marca Serie Modelo de trituradora
    Mettso Serie de conos Nordberg HP HP100, HP200, HP300, HP400, HP500, HP700, HP800 , HP900, HP3, HP4, HP5, HP6
    Serie GP de Nordberg GP100, GP200, GP200S, GP300, GP300S, GP11F, GP500, GP550S, GP220, GP330, GP7
    Nordberg Serie MP MP800, MP1000, MP1250, MP2250
    Serie multicilindro Omnicone 937SX, 1144SX, 1352, 1560, 937ST, 1352ST, 1144ST
    Sandvick Trituradora de cono serie CH CH420, CH430, CH440, CH830i, CH540, CH550, CH840i, CH660, CH860i, CH865, CH865i, CH870, CH870i, CH880, CH890 CH890i, CH895i
    Trituradora de cono serie CS CS420, CS430, CS440, CS840i, CS660
    Gama superior de conos giratorios  S2800, S3800, S4800, S6800
    Kleemann Gama Mobicone MCO9, MCO9i, MCO9s, MCO9si, MCO11, MCO11s, MCO11sx, MCO11 Pro, MCO13, MCO13s
    Shanbao Serie PYB PYB900, PYD900, PYZ900, PYB1200, PYD1200, PYZ1200, PYB1750, PYZ1750, PYD1750, PYB2200, PYZ2200, PYD2200
    Serie PYFB PYFB1325, PYFB1324, PYFB1321, PYFB1636, PYFB1626, PYFB1624, PYFB1620
    Serie PYFD  PYFD1313, PYFD1310, PYFD1308, PYFD1608, PYFD1607, PYFD1613, PYFD1614, PYFD1608, PYFD1607, PYFD1614
    Symons Trituradora de cono serie FT 2 PIES, 3 PIES, 4 PIES, 4-1/4 PIES, 5-1/2 PIES, 7 PIES
    Serie Gyradisc 36″,  48″,  66″
    Terex Gama Rollercone El-Jay ELJAY 45″, ELJAY 54″, ELJAY 66″
    Cedarapids RC36, RC45
    Trituradora de cono serie TC/TG TC1000, TC1150, TC1300, TG120, TG220, TG320, TG420, TG820, TG1020, TC100SR, TC1400, TC1500
    Trituradora de cono serie TGS/MVP TGS120, TGS220, TGS320, TGS420, MVP380X, MVP450X, MVP550X, RC45III
    Gama de conos MVP Cedar Rapids MVP280, MVP380, MVP450, MVP550, MVP380X, MVP450X, MVP550X
    Telsmith Trituradora de cono serie T T200, T300,T400, T500, T900.
    Serie Gyrasphere Cone 24″, 36″Std, 36FC, 38H, 44″, 48S", 48FC
    Trituradora de cono serie SBS/SBX SBS38, SBS44, SBS52, SBS57, SBS68, SBX44, SBX52, SBX57
    Faco Serie de conos Allis Chalmers 6-45,  7-60,  3-48, 3-84,  2-60,  10-60,  3-60
    Serie Hydrocone de Allis Chalmers H2000, H3000, H4000, H6000, H7000, H8000, H36″, H51
    Svedala  Serie Hydrocone H2800, H3800, H4800, H6800, H7800, H8800, H51, H36
    Chyi Meang Serie de conos hidráulicos PS2S , PC2S, PF2S, PC3S, PF3S, PC4S, PF4S, PSS2S
    Minyu Serie de conos combinados MCC1000, MCF1150, MCC1300, MCSS1300, MCC1370, MCC1500, MCS1500, MCC1680, MCF1680
    Serie de conos hidráulicos MSP100, MSP200, MSP300, MSP400
    Kawasaki Serie RX Cone RXC150, RXC220, RXC270
    Trío Serie TC TC36, TC51, TC66, TC84 Estándar y cabeza corta
    McColskey Serie de conos móviles C38, C44, C40, C50
    Sovient Serie KMD KCD-600, KCD-900, KMD-1200, KMD-1750, KMD-2200, KSD-2200
    Kodiak Serie cónica K200+ , k300+, K400+
    Sanme Serie SMH SMH120, SMH180, SMH250DC, SMH350EC, SMH550, CC51
    Nakayama Serie cónica NEM40H, NCC40H, NCSH42H, NSC200, NSC300, NSC400
    FLS medio Serie Raptor Cone XL300, XL400, XL500, XL600, XL900, XL1100, XL1300, XL2000, XL410
    Liming SBM Vipeak Serie CS CS75B, CS75D, CS160B, CS160D, CS240B, CS240D, CS400B, CS400D
    Kefid Serie HST HST100, HST160, HST250, HST315, HST560, HST750
    Zenith Serie HPT/HPC HPT100, HPT200, HPT300, HPT400, HPT500, HPT800, HPC220, HPC400
    Otras marcas y dibujos personalizados por favor póngase en contacto con nosotros para [email protected]

    The post 1286.05.411-1 Lower Mantle and 1286.05.414-1 Upper Mantle Suit Uralmash KSD3000/1500 Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>         1286.07.164-1 Fixed Liner Suit Uralmash KSD3000/1500 Cone Crusher https://miningspareparts.com/es/producto/ksd3000-fixed-liner-1286-07-164-1/ Thu, 22 Aug 2024 05:19:42 +0000 https://miningspareparts.com/?post_type=product&p=10490 Nombres de los artículos: Cóncavo, Manto, Anillo Cóncavo, Segmento Cóncavo, Revestimiento de Tazón, Revestimiento de Cono, Guardabrazos, Placa de Distribución, Manto Inferior, Manto Superior

    Modelo: KSD3000      Pesos: 7,408kg       Código del artículo: 1286.07.164-1

    Material de fundición:  M13Cr2, Mn18Cr2, Mn22Cr2

    Material aplicable: Grava, Granito, Basalto, Mineral, Caliza, Arenisca, Quatz, Adoquín

    Aplicaciones: Minería, canteras, construcción, cemento y materiales, reciclaje

    The post 1286.07.164-1 Fixed Liner Suit Uralmash KSD3000/1500 Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>     MiningSpares tiene larga comprensión y cobertura Trituradoras de cono coinciden ，.He aquí la descripción de KSD3000 Fixed Liner.

    El revestimiento fijo KSD3000 de MiningSpares utiliza aleaciones de manganeso de alta calidad, incluidas las aleaciones 13% Standard, 18% Premium y 22% High, para satisfacer diversos requisitos operativos y puede personalizarse según sus necesidades.
    También tenemos varios colores para que usted elija, rojo, azul, verde, negro, gris y así sucesivamente

    El proceso de fabricación es muy estricto para garantizar un ajuste perfecto con la máquina.

    Las camisas fijas KSD3000 de MiningSpares se fabrican mediante avanzados procesos de fundición. Durante el proceso de fabricación, controlamos estrictamente la selección de materiales y el flujo del proceso para garantizar la excelencia en la calidad y el rendimiento del producto. Utilizamos materiales de acero aleado de alta calidad combinados con una avanzada tecnología de fundición para garantizar que nuestros productos tengan una excelente resistencia al desgaste y a los impactos. Además, nuestro proceso de fabricación incluye procesos de mecanizado de precisión y tratamiento térmico para mejorar aún más la resistencia y la durabilidad.

    Para la mayoría de marcas de renombre mundial como Mettso, Sandvick, Terex, Shanbao, Telsmith, etc.
    Todos tenemos un gran inventario de dibujos originales, lo que nos ayuda a producir a un coste relativamente bajo.

    Marca Serie Modelo de trituradora
    Mettso Serie de conos Nordberg HP HP100, HP200, HP300, HP400, HP500, HP700, HP800 , HP900, HP3, HP4, HP5, HP6
    Serie GP de Nordberg GP100, GP200, GP200S, GP300, GP300S, GP11F, GP500, GP550S, GP220, GP330, GP7
    Nordberg Serie MP MP800, MP1000, MP1250, MP2250
    Serie multicilindro Omnicone 937SX, 1144SX, 1352, 1560, 937ST, 1352ST, 1144ST
    Sandvick Trituradora de cono serie CH CH420, CH430, CH440, CH830i, CH540, CH550, CH840i, CH660, CH860i, CH865, CH865i, CH870, CH870i, CH880, CH890 CH890i, CH895i
    Trituradora de cono serie CS CS420, CS430, CS440, CS840i, CS660
    Gama superior de conos giratorios  S2800, S3800, S4800, S6800
    Kleemann Gama Mobicone MCO9, MCO9i, MCO9s, MCO9si, MCO11, MCO11s, MCO11sx, MCO11 Pro, MCO13, MCO13s
    Shanbao Serie PYB PYB900, PYD900, PYZ900, PYB1200, PYD1200, PYZ1200, PYB1750, PYZ1750, PYD1750, PYB2200, PYZ2200, PYD2200
    Serie PYFB PYFB1325, PYFB1324, PYFB1321, PYFB1636, PYFB1626, PYFB1624, PYFB1620
    Serie PYFD  PYFD1313, PYFD1310, PYFD1308, PYFD1608, PYFD1607, PYFD1613, PYFD1614, PYFD1608, PYFD1607, PYFD1614
    Symons Trituradora de cono serie FT 2 PIES, 3 PIES, 4 PIES, 4-1/4 PIES, 5-1/2 PIES, 7 PIES
    Serie Gyradisc 36″,  48″,  66″
    Terex Gama Rollercone El-Jay ELJAY 45″, ELJAY 54″, ELJAY 66″
    Cedarapids RC36, RC45
    Trituradora de cono serie TC/TG TC1000, TC1150, TC1300, TG120, TG220, TG320, TG420, TG820, TG1020, TC100SR, TC1400, TC1500
    Trituradora de cono serie TGS/MVP TGS120, TGS220, TGS320, TGS420, MVP380X, MVP450X, MVP550X, RC45III
    Gama de conos MVP Cedar Rapids MVP280, MVP380, MVP450, MVP550, MVP380X, MVP450X, MVP550X
    Telsmith Trituradora de cono serie T T200, T300,T400, T500, T900.
    Serie Gyrasphere Cone 24″, 36″Std, 36FC, 38H, 44″, 48S", 48FC
    Trituradora de cono serie SBS/SBX SBS38, SBS44, SBS52, SBS57, SBS68, SBX44, SBX52, SBX57
    Faco Serie de conos Allis Chalmers 6-45,  7-60,  3-48, 3-84,  2-60,  10-60,  3-60
    Serie Hydrocone de Allis Chalmers H2000, H3000, H4000, H6000, H7000, H8000, H36″, H51
    Svedala  Serie Hydrocone H2800, H3800, H4800, H6800, H7800, H8800, H51, H36
    Chyi Meang Serie de conos hidráulicos PS2S , PC2S, PF2S, PC3S, PF3S, PC4S, PF4S, PSS2S
    Minyu Serie de conos combinados MCC1000, MCF1150, MCC1300, MCSS1300, MCC1370, MCC1500, MCS1500, MCC1680, MCF1680
    Serie de conos hidráulicos MSP100, MSP200, MSP300, MSP400
    Kawasaki Serie RX Cone RXC150, RXC220, RXC270
    Trío Serie TC TC36, TC51, TC66, TC84 Estándar y cabeza corta
    McColskey Serie de conos móviles C38, C44, C40, C50
    Sovient Serie KMD KCD-600, KCD-900, KMD-1200, KMD-1750, KMD-2200, KSD-2200
    Kodiak Serie cónica K200+ , k300+, K400+
    Sanme Serie SMH SMH120, SMH180, SMH250DC, SMH350EC, SMH550, CC51
    Nakayama Serie cónica NEM40H, NCC40H, NCSH42H, NSC200, NSC300, NSC400
    FLS medio Serie Raptor Cone XL300, XL400, XL500, XL600, XL900, XL1100, XL1300, XL2000, XL410
    Liming SBM Vipeak Serie CS CS75B, CS75D, CS160B, CS160D, CS240B, CS240D, CS400B, CS400D
    Kefid Serie HST HST100, HST160, HST250, HST315, HST560, HST750
    Zenith Serie HPT/HPC HPT100, HPT200, HPT300, HPT400, HPT500, HPT800, HPC220, HPC400
    Otras marcas y dibujos personalizados por favor póngase en contacto con nosotros para [email protected]

    The post 1286.07.164-1 Fixed Liner Suit Uralmash KSD3000/1500 Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

    ]]>