Product Overview

This is a complete TIC composite wear parts set for the TRIO TP450 Cone Crusher, comprising one Bowl Liner (TRIO17023516) and one Mantle (TRIO17023515). Manufactured from high-manganese steel (Mn18Cr2) with embedded Titanium Carbide (TiC) ceramic composite inserts, these liners deliver 2–3 times the wear life of standard manganese steel parts. Direct-fit replacement — no modifications required.

TIC composite mantle (TRIO17023515) — green cone with visible TiC ceramic inserts (circular dots)

What is TIC Composite Wear Material?

TIC (Titanium Carbide) composite technology represents a major advancement in crusher wear part design. Hard TiC ceramic particles are embedded into a Mn18Cr2 high-manganese steel matrix during the casting process. The result is a wear surface that combines the extreme hardness of ceramics (HV 2400+) with the toughness and impact resistance of manganese steel.

Bowl Liner & Mantle: Working Principle

In a cone crusher, the Manto (inner moving cone) and the Revestimiento (outer fixed concave) form the crushing chamber. As the mantle gyrates, rock is compressed and crushed between these two wear surfaces. Both parts are consumable — they wear progressively and must be replaced to maintain crushing efficiency and product gradation.

Bowl liner family — multiple sizes showing TIC composite construction

Key Features & Advantages

• Extended service life: TIC composite delivers 2–3× the wear life of standard Mn18Cr2, reducing downtime and replacement frequency
• Consistent product gradation: Wear-resistant TiC inserts maintain chamber profile longer, ensuring consistent output size throughout the liner lifecycle
• Reduced total cost of ownership: Fewer replacements = less labor, less downtime, lower per-ton crushing cost
• Direct OEM-equivalent fit: Precision-cast to TP450 specifications — drop-in replacement, no modifications needed
• Superior impact resistance: Mn18Cr2 steel matrix absorbs shock loads, preventing brittle fracture of ceramic inserts
• Work-hardening capability: The manganese steel matrix work-hardens under impact, becoming harder with use while TiC inserts provide continuous abrasion resistance
• Universal compatibility: Set includes both mantle and bowl liner for a complete chamber refresh

Typical Applications

Quarrying
Granite, basalt, limestone

Mining
Iron ore, copper, gold ore

Aggregates
Sand & gravel production

Construction
Road base, concrete aggregate

Recycling
Concrete & asphalt recycling

Demolition
Secondary/tertiary crushing

Material & Manufacturing Process

Base material: ASTM A128 Grade Mn18Cr2 — high-manganese austenitic steel with 18% Mn and 2% Cr, providing excellent work-hardening properties and impact toughness.

TIC inserts: Titanium Carbide (TiC) ceramic composite buttons are pre-placed in the mold at high-wear zones before pouring. During casting, the molten steel flows around and bonds with the TiC particles, creating a metallurgical bond between ceramic and steel.

Manufacturing route: Full-mold (lost-foam) casting or precision sand casting → controlled solidification → heat treatment (solution annealing + water quench) → rough and finish machining to OEM dimensions → final inspection.

Quality Control & Inspection

• Chemical composition analysis — Spectrometer verification of Mn, Cr, C, Si, P, S content per ASTM A128
• Mechanical hardness testing — Brinell HB measurement at multiple points (target: HB 220–260 for steel matrix)
• Dimensional inspection — CMM / template gauging against OEM drawings for profile accuracy
• Ultrasonic testing (UT) — Internal defect detection per ASTM E114
• TIC insert verification — Visual and dimensional check of ceramic insert distribution and bond quality
• Surface finish inspection — Visual + dye penetrant testing for surface cracks or defects
• Weight verification — Final weight recorded and compared to nominal (ref. 1312 kg/set)

Packaging & Shipping

Each liner is individually packaged in heat-treated (ISPM-15 compliant) wooden crates with steel banding and anti-corrosion VCI film wrapping. Crates are designed to withstand international container shipping. Suitable for both LCL and FCL container loading. Shipping marks and product labels applied per customer requirements.

Specification Table

The post TRIO17023516 & TRIO17023515 TIC Composite Bowl Liner + Mantle Set for TP450 Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

El manto MP800 de MiningSpares utiliza aleaciones de manganeso de alta calidad, incluidas las aleaciones 13% Standard, 18% Premium y 22% High, para satisfacer diversos requisitos operativos y puede personalizarse según sus necesidades.
También tenemos varios colores para que usted elija, rojo, azul, verde, negro, gris y así sucesivamente

El proceso de fabricación es muy estricto para garantizar un ajuste perfecto con la máquina.

Los mantos MiningSpares'MP800 se fabrican mediante procesos de fundición avanzados. Durante el proceso de fabricación, controlamos estrictamente la selección de materiales y el flujo del proceso para garantizar la excelencia en la calidad y el rendimiento del producto. Utilizamos materiales de acero aleado de alta calidad combinados con una avanzada tecnología de fundición para garantizar que nuestros productos tengan una excelente resistencia al desgaste y a los impactos. Además, nuestro proceso de fabricación incluye procesos de mecanizado de precisión y tratamiento térmico para mejorar aún más la resistencia y la durabilidad.

Para la mayoría de marcas de renombre mundial como Mettso, Sandvick, Terex, Shanbao, Telsmith, etc.
Todos tenemos un gran inventario de dibujos originales, lo que nos ayuda a producir a un coste relativamente bajo.

The post Mantle Liner 1050143952 Suit MP800 Shorthead Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.