The post MC110R EVO MC110Z EVO Jaw Crusher Wear Parts Set Fixed Jaw Moving Jaw and Cheek Plates Mn18Cr2 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>This is a complete jaw wear parts set for the MC110R EVO and MC110Z EVO mobile jaw crushers, comprising the fixed crusher jaw, the moving crusher jaw and a pair of lower cheek plates. Manufactured by MiningSpares in Mn18Cr2 high manganese steel, these are the components that form the crushing chamber and take the direct wear from the feed material — so they are the parts replaced on a routine maintenance interval.
The set is supplied as a matched group so that the fixed jaw, moving jaw and cheek plates seat correctly against the jaw stock and frame, keeping the crushing gap and the jaw closing geometry within specification.
| No. | Código del artículo | Nombre del artículo | Descripción |
|---|---|---|---|
| 1 | 2419253 | Mandíbula trituradora fija | MC110R EVO / MC110Z EVO |
| 2 | 2419251 | Mandíbula trituradora móvil | MC110R EVO / MC110Z EVO |
| 3 | 2355334 | Lower Cheek Plate L | MC110Z |
| 4 | 2355337 | Lower Cheek Plate R | MC110Z |
The MC110R EVO / MC110Z EVO is a mobile jaw crusher used as a primary crusher in demolition and recycling, natural stone processing, and quarrying. The machine uses a single-toggle jaw crusher unit with a hydraulically adjustable gap, fed by an independent vibrating feeder. The crushing chamber is lined by the fixed jaw (mounted on the crusher frame) and the moving jaw (carried on the jaw stock), with lower cheek plates closing the sides of the chamber. The toothed profile of both jaws grips and compresses the material, so tooth height and profile wear directly control the reduction ratio and the final product shape.
Typical use includes construction and demolition waste recycling, asphalt and concrete recycling, natural rock crushing (granite, basalt, limestone, river gravel), and quarry primary crushing. The wear life of the fixed and moving jaws depends on feed size, material abrasiveness and the gap setting — a matched set keeps both jaws wearing evenly.
For pricing, lead time and availability on the MC110R EVO / MC110Z EVO jaw wear parts set (2419253 fixed jaw, 2419251 moving jaw, 2355334 / 2355337 lower cheek plates), please use the Añadir a la consulta button on this page or email us at [email protected]. Our sales team responds within one business day.
The post MC110R EVO MC110Z EVO Jaw Crusher Wear Parts Set Fixed Jaw Moving Jaw and Cheek Plates Mn18Cr2 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post 30721010 Fixed Jaw plate 30701020 Swing Jaw plate for SAES CX120 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>High-manganese fixed and swing jaw plates manufactured by MiningSpares for the SAES CX120
European-type jaw crusher. SAES (Saes Makine Sanayi ve Ticaret A.Ş., Turkey) is an established
crushing and screening equipment manufacturer founded in 1992. The CX120 is their heavy-duty primary jaw crusher
designed for hard-rock quarrying and mining applications.
| No. | Drawing No. | Nombre | Material |
|---|---|---|---|
| 1 | 30721010 | Fixed Jaw 2P (Stationary Jaw Plate) | Mn18% |
| 2 | 30701020 | Swing Jaw 2P (Movable Jaw Plate) | Mn18% |
All jaw plates are cast in Mn18% high-manganese steel (ASTM A128 Grade B2 equivalent)
using water-glass sand casting. Each plate undergoes solution heat treatment (water quenched) to achieve a fully
austenitic structure, then precision-machined on all mating surfaces for direct fitment into the SAES CX120 frame.
Key material properties:
SAES CX120 jaw plates are designed for primary crushing of medium-hard to hard rock in quarrying,
aggregate production, mining and construction-recycling operations — granite, basalt, limestone, diabase
and similar abrasive materials up to 700 mm feed size.
Q1. What is the standard material grade?
Mn18% high-manganese steel (equivalent to ASTM A128 Gr.B2). Mn18Cr2 and Mn13Cr2 grades are available
on request for highly abrasive or high-impact duties.
Q2. Can I buy individual plates?
Yes. The fixed jaw (30721010) and swing jaw (30701020) can be ordered separately.
Q3. What is the lead time?
Machined plates from stock: 7–10 working days. Fresh castings: 25–35 days. Breakdown orders
can be expedited with air freight.
Q4. What documentation is supplied?
Every shipment includes spectrometer chemical-composition report, hardness test report and dimensional
inspection report. Third-party inspection (SGS, BV, TÜV) available on request.
Q5. Is this an OEM part?
No. These are aftermarket replacement parts manufactured by MiningSpares to original drawing specifications.
Not affiliated with or endorsed by SAES Makine.
For pricing, lead time and alternative material options on SAES CX120 jaw plates, use the
Añadir a la consulta button or email us at
[email protected]. Response within one business day.
The post 30721010 Fixed Jaw plate 30701020 Swing Jaw plate for SAES CX120 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post 3440.02.010 / 3440.02.020 / 3440.01.110 Jaw Plates for Russian SMD111 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>High-manganese swing and fixed jaw plates manufactured by MiningSpares for the СМД-111
(SMD111) jaw crusher – the Russian-built primary jaw crusher also designated
ЩДП-9х12 and originally produced by Volgotsemmash (ОАО «Волгоцеммаш»).
The set consists of three cast manganese plates that form the primary crushing chamber: an upper and a lower
swing (movable) jaw plate running on the pitman, plus the stationary fixed jaw plate. Each plate is cast,
heat-treated and machined to drawing for direct replacement, with no frame modification required.
| No. | Drawing No. | Nombre | Material | Peso (kg) |
|---|---|---|---|---|
| 1 | 3440.02.010 | Swing Jaw Plate (Upper) / Movable Jaw Plate Upper | Mn18% | 961 |
| 2 | 3440.02.020 | Swing Jaw Plate (Lower) / Movable Jaw Plate Lower | Mn18% | 960 |
| 3 | 3440.01.110 | Fixed Jaw Plate 2P / Stationary Jaw Plate | Mn18% | 840 |
| Total set weight | 2,761 | |||
Item 3 (3440.01.110) is a 2-piece (2P) fixed jaw plate design.
All three plates are cast in Mn18% high-manganese steel (austenitic manganese steel,
equivalent to ASTM A128 Grade B2 / GOST 977-88 grade 110Г13Л) using water-glass sand casting. Each casting
is solution heat-treated (water quenched) to deliver a fully austenitic structure, then precision-machined on
all mating and seating faces so it seats correctly against the СМД-111 crusher frame and pitman.
For fitment confirmation, the host machine data published by the original manufacturer:
СМД-111 jaw plates are used for primary crushing in hard-rock mining, quarry and aggregate production,
and construction-recycling duties – typically granite, gabbro, basalt and diabase duty in Russian and
CIS crushing plants.
Q1. What material grade are the plates supplied in?
Mn18% high-manganese steel as standard. Mn18Cr2 and Mn13Cr2 are available on request for highly abrasive
or high-impact duties.
Q2. Can I buy a single plate rather than the full set?
Yes. Each of the three plates can be ordered separately – just quote the drawing number(s) from the table
above when enquiring.
Q3. What is the lead time?
Machined plates from stock: 7–10 working days. Fresh castings: 25–35 days. Breakdown orders can be
expedited and shipped by airfreight.
Q4. What documentation is supplied?
Every shipment includes spectrometer chemical-composition report, hardness test report and dimensional
inspection report. Third-party inspection (SGS, BV, TÜV) can be arranged on request.
Q5. Is this an OEM part?
No. These are aftermarket replacement parts manufactured by MiningSpares to the original drawings. They are
not affiliated with, or endorsed by, the original equipment manufacturer.
For pricing, lead time and alternative material grades on СМД-111 (SMD111) jaw plates, use the
Añadir a la consulta button on this page or email us at
[email protected]. Our sales team responds within one business day.
The post 3440.02.010 / 3440.02.020 / 3440.01.110 Jaw Plates for Russian SMD111 Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post MM0273923 Fixed Jaw Quarry MM0273924 Swing Jaw Quarry For C106 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>High manganese Mn18Cr2 fixed and swing jaw plates manufactured by MiningSpares for Metso Nordberg C106 jaw crushers. Each casting is produced in our own foundry, heat-treated for work-hardening performance and precision-machined on all mating faces to OEM specifications, providing a direct drop-in replacement for the original Metso parts.
| No. | Nombre | Drawing No. | Material | Qty (pcs) | Unit Weight (kg) | Total Weight (kg) |
|---|---|---|---|---|---|---|
| 1 | Placa de mandíbula fija | MM0273923 | Mn18Cr2 | 2 | 1,115 | 2,230 |
| 2 | Placa de mandíbula giratoria | MM0273924 | Mn18Cr2 | 1 | 1,040 | 1,040 |
The Metso Nordberg C106 is a compact primary jaw crusher designed for hard rock and recycle applications in mining, quarry and aggregate operations. With a 1060 × 700 mm (42 × 28 in) jaw opening, the C106 delivers high throughput in a small footprint and is widely used as a primary stage in both stationary and track-mounted plants. The key wear parts in the C106 are the fixed and swing jaw plates – the components that MiningSpares supplies in Mn18Cr2 high manganese steel under drawing numbers MM0273923 and MM0273924.
Metso Nordberg C106 jaw crusher and similar Metso C-series primary jaw crushers. Drawing numbers covered on this page: MM0273923 (fixed jaw plate, 2 pieces per crusher set) and MM0273924 (swing jaw plate, 1 piece per crusher set).
Our Metso C106 fixed and swing jaw plates are produced through water-glass sand casting, followed by a controlled heat treatment cycle to develop the work-hardening austenitic manganese structure. Each plate is then precision-machined on the back face, bolt-hole pattern and edge profile to ensure a perfect fit with the C106 jaw crusher frame and to match the original swing geometry of the machine.
Metso C106 jaw plates are used in primary crushing of granite, basalt, gneiss, quartzite, iron ore, copper ore, gold ore, limestone and other medium-hard to hard rock. Typical installations include hard rock mining operations, quarries, aggregate production, and construction and demolition recycling.
Browse more high manganese crusher wear parts from MiningSpares:
For pricing, lead time and material options on Metso C106 jaw plates MM0273923 and MM0273924, please use the Añadir a la consulta button on this page or email us at [email protected]. Our sales team will respond within one business day.
The post MM0273923 Fixed Jaw Quarry MM0273924 Swing Jaw Quarry For C106 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Jaw Plate 400.0483 Suit JM907/CJ409 Jaw Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Jaw Plate 400.0483 Suit JM907/CJ409 Jaw Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Fixe Jaw C-01255 & Swing Jaw C-01256 for Pioneer 30×42 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Fixe Jaw C-01255 & Swing Jaw C-01256 for Pioneer 30×42 appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post Komatsu BR380 Jaw Crusher Jaw Tooth appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>Nombres de los artículos: Placas de mandíbula,Diente de mandíbula estacionario,Matriz de mandíbula móvil,Mandíbula fija,Placa de mandíbula oscilante,Mandíbula fija,Mandíbula móvil ,Placa de mejilla ,Placa lateralFundición
Material: Acero al manganeso austensítico (Mn14, M14Cr2, Mn18Cr2, Mn22Cr2)
Material aplicable:Grava, granito, basalto, mineral, piedra caliza, arenisca, Quatz, adoquines
Aplicaciones: Minería , Canteras, Construcción ,Cemento y Materiales ,Reciclaje
| Código del artículo | Nombre del artículo | Descripción | Modelo | Peso |
| 8240-70-5051 | Placa,Fija | Revestimiento de mandíbula | BR380 | |
| 8240-70-5052 | Placa de mandíbula fija | Revestimiento de mandíbula | BR380JG | 890 |
| 8240-70-5071 | Placa de mandíbula giratoria | Revestimiento de mandíbula | BR380JG | 735 |
| 8240-70-5111 | Placa superior de la mejilla (izquierda) | Revestimiento de mandíbula | BR380JG | 74 |
| 8240-70-5121 | Placa superior de la mejilla (derecha) | Revestimiento de mandíbula | BR380JG | 74 |
| 8240-70-5131 | Placa inferior de la mejilla (izquierda) | Revestimiento de mandíbula | BR380JG | 36 |
| 8240-70-5141 | Placa inferior de la mejilla (derecha) | Revestimiento de mandíbula | BR380JG | 36 |
| 8240-70-5111 + 8240-70-5131 | Placa, Cheek L.H. | Revestimiento de mandíbula | BR380 | |
| 8240-70-5121 + 8240-70-5141 | Placa, Cheek R.H. | Revestimiento de mandíbula | BR380 |
Como fabricante líder de dientes de mandíbula Komatsu BR380, nuestro producto destaca por su calidad superior y durabilidad. Fabricados con precisión, estos dientes de mandíbula garantizan un rendimiento óptimo en aplicaciones de trituración. Su robusta construcción garantiza la resistencia al desgaste, contribuyendo a prolongar la vida operativa y a reducir los costes de mantenimiento. Confíe en nuestro compromiso de suministrar componentes de alta calidad que mejoren la eficacia de su trituradora de mandíbulas Komatsu BR380.
The post Komatsu BR380 Jaw Crusher Jaw Tooth appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>