- TRIO17052179 — Swing Jaw Plate — 2,857 kg
- TRIO17052178 — Fixed Jaw Plate — 2,990 kg
- TRIO17003911 — Wedge Die, Swing LH — 50.8 kg
- TRIO17003912 — Wedge Die, Swing RH — 50.8 kg
- TRIO17003942 — Low Cheek Plate, LH — 271 kg
- TRIO17003941 — Upper Cheek Plate, RH — 387 kg
- TRIO17003948 — Wedge Block
The post Full Set of Jaw Plates Cheek plates Wedges For TRIO CT4254 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>Equipment Overview
The TRIO CT4254 is a heavy-duty single-toggle jaw crusher widely used in mining, quarrying, aggregate production, and recycling for primary and secondary crushing of hard rock, ores, and demolition material. Its robust cast-steel frame and high-inertia eccentric shaft deliver consistent throughput under continuous duty.
The crushing chamber is formed by two opposing wear surfaces — the fixed jaw (stationary) and the swing jaw (reciprocating). Material is compressed and fractured between them on every stroke. Surrounding these liners, a set of supporting and clamping components keeps the wear parts seated, aligned, and tensioned so the crusher runs safely at full capacity. The seven parts listed below cover the complete wear and structural interface set for the CT4254 jaw module:
- Fixed Jaw & Swing Jaw – the primary crushing surfaces (manganese liners).
- Wedge Die, Swing (LH/RH) – clamps and locks the swing jaw liner to the swing jaw body.
- Upper / Lower Cheek Plates (RH/LH) – side liners that protect the crusher frame from abrasion.
- Wedge Block (TRIO17003948) – the hold-down / tension component that maintains liner position and crushing gap.
Available Parts List
| No. | Part Name | Número de pieza | Modelo | Function | Peso (kg) |
|---|---|---|---|---|---|
| 1 | Placa de mandíbula giratoria | TRIO17052179 | CT4254 | Movable crushing surface mounted on the swing jaw; the high-impact wear liner that does most of the comminution work. | 2,857 |
| 2 | Placa de mandíbula fija | TRIO17052178 | CT4254 | Stationary crushing surface; the fixed wear liner against which rock is compressed and fractured. Directly determines product shape and reduction ratio. | 2,990 |
| 3 | Wedge Die, Swing LH | TRIO17003911 | CT4254 | Left-hand clamping wedge that locks the swing jaw liner firmly against the swing jaw body, maintaining crushing force and preventing liner movement. | 50.8 |
| 4 | Wedge Die, Swing RH | TRIO17003912 | CT4254 | Right-hand clamping wedge that locks the swing jaw liner firmly against the swing jaw body, maintaining crushing force and preventing liner movement. | 50.8 |
| 5 | Low Cheek Plate, LH | TRIO17003942 | CT4254 | Left-hand lower side liner protecting the frame at the discharge side; replacement restores proper chamber alignment. | 271 |
| 6 | Upper Cheek Plate, RH | TRIO17003941 | CT4254 | Right-hand upper side liner that shields the crusher frame from abrasive material flow, extending frame service life. | 387 |
| 7 | Wedge Block | TRIO17003948 | CT4254 | Hold-down / tension block that maintains liner position and crushing gap, securing the wear parts under operational load. |
Material & Manufacturing
All wear liners in this set are produced from high-manganese steel (Mn13 / Mn18Cr2) selected for its work-hardening behaviour — the surface grows harder under impact, giving excellent abrasion resistance in hard-rock service. Cheek plates and wedge components use cast carbon / low-alloy steel with precision machining for accurate fit.
Manufacturing follows a controlled process route:
- Pattern & casting – resin sand moulding with controlled chemistry and pouring.
- Heat treatment – water quenching and tempering to develop the required hardness and toughness.
- Machining & inspection – critical faces and bolt holes machined to drawing; dimensions, hardness, and surface checked.
- QC release – only parts passing inspection are packed and shipped.
OEM Quality Assurance
- Built to Original Specifications – manufactured to TRIO CT4254 drawings for 100% interchangeability with the genuine parts.
- Material Traceability – heat / batch numbers recorded; material test reports available on request.
- Strict Quality Control – dimensional, hardness, and surface inspection on every batch before release.
- Field-Proven Reliability – supplied to mining and aggregate operations across multiple continents.
Inquiry, Lead Time & Warranty
- Pricing – quote provided on inquiry; volume and repeat-order discounts available.
- Lead Time – typical 2–4 weeks depending on quantity and current foundry schedule.
- Shipping – seaworthy export packaging; worldwide delivery by sea or air.
- Warranty – 12 months against manufacturing defects.
- Customization – non-standard sizes, materials, or drawings can be produced on request.
FAQ
Q: Are these parts interchangeable with the original TRIO CT4254?
A: Yes. All parts are manufactured to original equipment drawings and are fully interchangeable with genuine TRIO CT4254 components.
Q: What is the typical lead time?
A: Standard items ship in 2–4 weeks; urgent orders can be discussed case by case.
Q: Can you supply parts to our own drawings or specifications?
A: Yes. We produce both standard and custom wear parts; send your drawing, sample, or part number and we will quote.
Q: Do you provide technical support for installation?
A: Yes. Layout drawings and fitting guidance are available; our engineers can advise on liner change-out and chamber setup.
Request a Quote for TRIO CT4254 Parts
.parts-table { width:100%; border-collapse:collapse; margin:16px 0; }
.parts-table th, .parts-table td { border:1px solid #ddd; padding:8px 10px; text-align:left; vertical-align:top; }
.parts-table th { background:#f5f5f5; font-weight:600; }
.parts-table tr:nth-child(even) { background:#fafafa; }
.button { display:inline-block; background:#c0392b; color:#fff !important; padding:12px 24px; border-radius:4px; text-decoration:none; font-weight:600; }
@media (max-width:768px) { .parts-table { display:block; overflow-x:auto; white-space:nowrap; } }
The post Full Set of Jaw Plates Cheek plates Wedges For TRIO CT4254 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post TRIO17088016 Chain Assembly for TAF1818 Apron Feeder appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>TRIO17088016 Chain Assembly for TAF1818 Apron Feeder
Heavy-duty chain assembly engineered for TRIO TAF1818 apron feeder systems. Direct OEM-compatible replacement, manufactured to exact specifications for reliable performance in demanding mining and quarrying operations.
Product Overview
The TRIO17088016 Chain Assembly is the core traction component of the TAF1818 apron feeder, responsible for driving the feeder pan and conveying bulk materials. This assembly is precision-engineered to withstand high tensile loads, abrasive wear, and shock impact typical in mining, aggregate, and mineral processing applications. With a unit weight of 27,779.1 kg, it is a substantial heavy-duty component designed for continuous-duty operation.
Especificaciones
| Parameter | Value |
|---|---|
| Número de pieza | TRIO17088016 |
| Product Name | Chain Assembly |
| Compatible Model | TRIO TAF1818 Apron Feeder |
| Unit Weight | 27,779.1 Kg |
| Application | Apron Feeder Drive Chain |
| Marca | TRIO / Weir Minerals |
| Tipo | OEM-Compatible Replacement |
Key Features
Engineered for heavy-load continuous operation under extreme conditions.
Hardened pin and bushing surfaces for extended service life.
Interchangeable with OEM TRIO17088016 — no modifications required.
Tight tolerances on pitch and pin alignment for smooth sprocket engagement.
Aplicaciones
- Mining & mineral processing — primary crusher feed
- Aggregate & quarry operations — material transfer
- Cement plants — clinker and raw material handling
- Heavy-duty bulk material conveying in harsh environments
Related TAF Series Parts
This chain assembly is part of our complete TRIO TAF Series Apron Feeder spare parts program covering TAF1808, TAF1818, and TAF1809 models — including rollers, sprockets, shafts, bearings, gearboxes, and more.
Browse the full parts list: TRIO TAF Series Apron Feeder Spare Parts Catalog →
Request a Quote
Contact us for pricing, lead time, and technical specifications for the TRIO17088016 Chain Assembly.
The post TRIO17088016 Chain Assembly for TAF1818 Apron Feeder appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post TRIO TAF Series Apron Feeder Spare Parts appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>TRIO TAF Series Apron Feeder Spare Parts
Complete catalog of OEM-compatible replacement parts for TRIO TAF1808, TAF1818, and TAF1809 apron feeders. Chain assemblies, rollers, sprockets, shafts, bearings, gearboxes — all in stock or available for quick manufacture.
Featured: TRIO17088016 Chain Assembly
Heavy-duty chain assembly for TAF1818 apron feeder. Unit weight 27,779.1 kg. OEM-compatible direct-fit replacement with hardened pins and bushings for extended wear life.
MiningSpares supplies direct-fit replacement parts for the full range of TRIO TAF Series Apron Feeders. All parts are manufactured to exact OEM specifications, ensuring interchangeability and reliable performance. Browse the parts list by model below and contact us for pricing.
TAF1808 Spare Parts — 1 Items
| No. | Drawing No. | Product Name | Modelo | Peso |
|---|---|---|---|---|
| 1 | TRIO17022097 | Apron Feeder Wheel Rear | TAF1808 | 380.0 Kg(S) |
TAF1818 Spare Parts — 4 Items
| No. | Drawing No. | Product Name | Modelo | Peso |
|---|---|---|---|---|
| 1 | CMDY17095629 | Track Roller T203E-Z-D6D-00/7G0421/7G0423 (DSL) | TAF1818 | 55.5 Kg(S) |
| 2 | CMDY17095863 | D6 Sprocket 23tooth (3 segment) | TAF1818 | 165.0 Kg(S) |
| 3 | TRIO17088016 | Chain Assembly | TAF1818 | 27779.1 Kg(S) |
| 4 | TRIO17088023 | Carrier roller Assembly (32pcs/Set) | TAF1818 | 125.5 Kg(S) |
TAF1809 Spare Parts — 28 Items
| No. | Drawing No. | Product Name | Modelo | Peso |
|---|---|---|---|---|
| 1 | 17021974 | Return Mechanism Assembly | TAF1809 | — |
| 2 | CMDY17001986 | Chain Bolt M24X1.5X85.10.9 | TAF1809 | — |
| 3 | CMDY17002572 | Return Wheel | TAF1809 | — |
| 4 | CMDY17002573 | Drive Shaft Sprocket | TAF1809 | — |
| 5 | CMDY17027247 | Roller Bearing | TAF1809 | — |
| 6 | CMDY17027248 | Adaptor | TAF1809 | — |
| 7 | CMDY17027262 | Adapter Oh3172H Skf | TAF1809 | — |
| 8 | CMDY17027264 | Support Roller | TAF1809 | 90.0 Kg(S) |
| 9 | CMDY17072788 | Gearbox Left P2Ka20-250-F315-L | TAF1809 | — |
| 10 | CMDY17072790 | Gearbox Right P2Ka20-250-F315-R | TAF1809 | — |
| 11 | CMDY17095936 | Bearing Radial Thrust Roller 23172Cak/W33 C3 | TAF1809 | — |
| 12 | CMDY17095941 | Bearing Radial Thrust Roller Double Row Spherical 23140Cak/W33 C3 | TAF1809 | — |
| 13 | TRIO17021877 | Placa | TAF1809 | — |
| 14 | TRIO17021890 | Anillo de estanqueidad | TAF1809 | — |
| 15 | TRIO17021896 | Drive Shaft Spacer | TAF1809 | — |
| 16 | TRIO17021974 | Roller | TAF1809 | — |
| 17 | TRIO17022091 | Chain Nut M24X1.5 | TAF1809 | — |
| 18 | TRIO17022094 | End Shaft Cover | TAF1809 | — |
| 19 | TRIO17022095 | End Shaft Cover | TAF1809 | — |
| 20 | TRIO17022101 | Caja de rodamientos | TAF1809 | — |
| 21 | TRIO17022102 | Sealing Ring | TAF1809 | — |
| 22 | TRIO17061550 | Bearing Unit | TAF1809 | — |
| 23 | TRIO17062190 | Drive Assembly | TAF1809 | — |
| 24 | TRIO17062290 | Bearing Unit | TAF1809 | — |
| 25 | TRIO17074629 | Chain Plate | TAF1809 | — |
| 26 | TRIO17074644 | Leading Shaft | TAF1809 | — |
| 27 | TRIO17074686 | End Shaft Cover | TAF1809 | — |
| 28 | TRIO17088945 | Return System | TAF1809 | 70.0 Kg(S) |
Note: Drawing No. corresponds to the ERPNext item code. Weight is shown where available in our system. Parts not yet in our ERP system are included from the reference parts list. Contact us for detailed specifications and cross-reference with your equipment serial number.
Request a Quote
Need pricing, lead time, or technical details for any TAF apron feeder part? Send us the Drawing No. for a fast response.
The post TRIO TAF Series Apron Feeder Spare Parts appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post TRIO17078205 Cover Aseembly For TRIO TC84X Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>Cover Assembly TRIO17078205 is a vital protective part for TRIO TC84X Cone Crusher. It serves as the first line of defense for the crusher’s internal core components. This product is widely applied in mining, quarrying and aggregate processing industries. It works stably under harsh conditions with high dust, strong vibration and flying debris. Its protective performance directly affects the service life of key parts like bearings and shafts. It is an indispensable component for enterprises pursuing low maintenance costs and high operational efficiency.
| # | Descripción | Part NO | CANT |
|---|---|---|---|
| 1 | Pump outlet flange | TRIO17028569 | 1 |
| 2 | Coupling Guard | TRIO17028940 | 1 |
| 3 | Espaciador | TRIO17028941 | 1 |
| 4 | Pipe | TRIO17028942 | 1 |
| 5 | Pipe | TRIO17028943 | 1 |
| 6 | Rubber Seal | TRIO17028944 | 1 |
| 7 | COVER WELDMENT | TRIO17027478 | 1 |
| 8 | Gasket | TRIO17028957 | 1 |
| 9 | Placa | TRIO17028962 | 1 |
| 10 | Motor Pump coupling | TRIO17023741 | 1 |
| 11 | Bolt GB5782 M12*4018.81zn | CMDY17000470 | 40 |
| 12 | Bolt GB5782 M16*5018.8\zn | CMDY17006777 | 4 |
| 13 | BOLT M16*70 | CMDY17012441 | 16 |
| 14 | Nut GB6170 M1618lzn | CMDY17001087 | 16 |
| 15 | Washer GB1230 121HRC35 | CMDY17005178 | 40 |
| 16 | WASHER GB1230 16\HRC35 | CMDY17000944 | 4 |
| 17 | WASHER GB93 12/65Mn | CMDY17000039 | 40 |
| 18 | Washer GB93 16/65Mn | CMDY17000004 | 20 |
| 19 | Washer GB97.1 8/140HV | CMDY17000043 | 10 |
| 20 | Washer GB97.1 16/140Hv | CMDY17000044 | 32 |
| 21 | Cap Screw GB70.1 M8×40/8.8lzn | CMDY17005770 | 6 |
| 22 | Cap Screw GB70.1 M8*15/4.8 | CMDY17005115 | 4 |
| 23 | Cap Screw GB70.1 M16*12/8.8 | CMDY17005233 | 2 |
| 24 | O Ring GB3452.1 12.5*2.65\RUBBER 12 | CMDY17005011 | 1 |
| 25 | O ring GB3452.1 95*5.3\RUBBER 1.2 | CMDY17005088 | 1 |
| 26 | BSPT MALE CONNECTOR 1BT-325P2″ | CMDY17005205 | 2 |
| 27 | MALE CONNECTOR DN50,GB3289.26 | CMDY17005035 | 1 |
| 28 | Tee GB3289.10 50 | CMDY17001817 | 1 |
| 29 | 90′ ELBOW R2″ GB3289.2 | CMDY17001820 | 1 |
| 30 | WIKA PRESSURE GAUGE | CMDY17072761 | 1 |
| 31 | BREATHER W/ AIRFILTER,G1-1/2A MALE | CMDY17002200 | 1 |
| 32 | Filter KXFB-630*80L-2 | CMDY17005761 | 1 |
| 33 | Liquid Level Sensor Assembly | TRIO17072516 | 1 |
| 34 | Piug | CMDY17090764 | 1 |
The post TRIO17078205 Cover Aseembly For TRIO TC84X Cone Crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post TRIO17039804 Bowl Liner and TRIO17039815 Mantle For TP600 Shorthead Cone crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>| ITEM | PART # | DESCRIPTION | CANT. | |
| 1 | TRIO17039803 | Mantle – Standard * | 1 | |
| 2 | TRIO17039815 | Mantle – Short Head * |
| ITEM | PART # | DESCRIPTION | CANT. | |
| 1 | TRIO17039806 | Bowl Liner – SC * |
1 |
|
| 2 | TRIO17039802 | Bowl Liner – SHF * | ||
| 3 | TRIO17039812 | Bowl Liner – SM * | ||
| 4 | TRIO17039810 | Bowl Liner – SHC * | ||
| 5 | TRIO17039814 | Bowl Liner – SF * | ||
| 6 | TRIO17039804 | Bowl Liner – SHM * |
The post TRIO17039804 Bowl Liner and TRIO17039815 Mantle For TP600 Shorthead Cone crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post TRIO17001081 Clamp Cylinder for TC84X Cone crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>The post TRIO17001081 Clamp Cylinder for TC84X Cone crusher appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.
]]>