cheek plate Archives - Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts https://miningspareparts.com/ru/product-tag/cheek-plate/ Mining Wear & Spare Parts Supplier Wed, 19 Aug 2026 13:37:27 +0000 ru-RU hourly 1 https://wordpress.org/?v=7.1 https://miningspareparts.com/wp-content/uploads/2026/08/cropped-logo正方形-32x32.webp cheek plate Archives - Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts https://miningspareparts.com/ru/product-tag/cheek-plate/ 32 32 Full Set of Jaw Plates Cheek plates Wedges For TRIO CT4254 Jaw https://miningspareparts.com/ru/product/trio-ct4254-liner/ Wed, 19 Aug 2026 05:36:01 +0000 https://miningspareparts.com/en/?post_type=product&p=13419 Complete TRIO CT4254 jaw crusher spare parts set — 7 OEM-spec cast steel & high-manganese liners, foundry-direct pricing, worldwide delivery.

  • TRIO17052179 — Swing Jaw Plate — 2,857 kg
  • TRIO17052178 — Fixed Jaw Plate — 2,990 kg
  • TRIO17003911 — Wedge Die, Swing LH — 50.8 kg
  • TRIO17003912 — Wedge Die, Swing RH — 50.8 kg
  • TRIO17003942 — Low Cheek Plate, LH — 271 kg
  • TRIO17003941 — Upper Cheek Plate, RH — 387 kg
  • TRIO17003948 — Wedge Block

The post Full Set of Jaw Plates Cheek plates Wedges For TRIO CT4254 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

]]>

Equipment Overview

The TRIO CT4254 is a heavy-duty single-toggle jaw crusher widely used in mining, quarrying, aggregate production, and recycling for primary and secondary crushing of hard rock, ores, and demolition material. Its robust cast-steel frame and high-inertia eccentric shaft deliver consistent throughput under continuous duty.

The crushing chamber is formed by two opposing wear surfaces — the fixed jaw (stationary) and the swing jaw (reciprocating). Material is compressed and fractured between them on every stroke. Surrounding these liners, a set of supporting and clamping components keeps the wear parts seated, aligned, and tensioned so the crusher runs safely at full capacity. The seven parts listed below cover the complete wear and structural interface set for the CT4254 jaw module:

  • Fixed Jaw & Swing Jaw – the primary crushing surfaces (manganese liners).
  • Wedge Die, Swing (LH/RH) – clamps and locks the swing jaw liner to the swing jaw body.
  • Upper / Lower Cheek Plates (RH/LH) – side liners that protect the crusher frame from abrasion.
  • Wedge Block (TRIO17003948) – the hold-down / tension component that maintains liner position and crushing gap.

Available Parts List

Нет. Part Name Номер детали Модель Function Вес (кг)
1 Пластина поворотной щеки TRIO17052179 CT4254 Movable crushing surface mounted on the swing jaw; the high-impact wear liner that does most of the comminution work. 2,857
2 Пластина с фиксированной челюстью TRIO17052178 CT4254 Stationary crushing surface; the fixed wear liner against which rock is compressed and fractured. Directly determines product shape and reduction ratio. 2,990
3 Wedge Die, Swing LH TRIO17003911 CT4254 Left-hand clamping wedge that locks the swing jaw liner firmly against the swing jaw body, maintaining crushing force and preventing liner movement. 50.8
4 Wedge Die, Swing RH TRIO17003912 CT4254 Right-hand clamping wedge that locks the swing jaw liner firmly against the swing jaw body, maintaining crushing force and preventing liner movement. 50.8
5 Low Cheek Plate, LH TRIO17003942 CT4254 Left-hand lower side liner protecting the frame at the discharge side; replacement restores proper chamber alignment. 271
6 Upper Cheek Plate, RH TRIO17003941 CT4254 Right-hand upper side liner that shields the crusher frame from abrasive material flow, extending frame service life. 387
7 Wedge Block TRIO17003948 CT4254 Hold-down / tension block that maintains liner position and crushing gap, securing the wear parts under operational load.

Material & Manufacturing

All wear liners in this set are produced from high-manganese steel (Mn13 / Mn18Cr2) selected for its work-hardening behaviour — the surface grows harder under impact, giving excellent abrasion resistance in hard-rock service. Cheek plates and wedge components use cast carbon / low-alloy steel with precision machining for accurate fit.

Manufacturing follows a controlled process route:

  1. Pattern & casting – resin sand moulding with controlled chemistry and pouring.
  2. Heat treatment – water quenching and tempering to develop the required hardness and toughness.
  3. Machining & inspection – critical faces and bolt holes machined to drawing; dimensions, hardness, and surface checked.
  4. QC release – only parts passing inspection are packed and shipped.

OEM Quality Assurance

  • Built to Original Specifications – manufactured to TRIO CT4254 drawings for 100% interchangeability with the genuine parts.
  • Material Traceability – heat / batch numbers recorded; material test reports available on request.
  • Strict Quality Control – dimensional, hardness, and surface inspection on every batch before release.
  • Field-Proven Reliability – supplied to mining and aggregate operations across multiple continents.

Inquiry, Lead Time & Warranty

  • Pricing – quote provided on inquiry; volume and repeat-order discounts available.
  • Lead Time – typical 2–4 weeks depending on quantity and current foundry schedule.
  • Shipping – seaworthy export packaging; worldwide delivery by sea or air.
  • Warranty – 12 months against manufacturing defects.
  • Customization – non-standard sizes, materials, or drawings can be produced on request.

FAQ

Q: Are these parts interchangeable with the original TRIO CT4254?
A: Yes. All parts are manufactured to original equipment drawings and are fully interchangeable with genuine TRIO CT4254 components.

Q: What is the typical lead time?
A: Standard items ship in 2–4 weeks; urgent orders can be discussed case by case.

Q: Can you supply parts to our own drawings or specifications?
A: Yes. We produce both standard and custom wear parts; send your drawing, sample, or part number and we will quote.

Q: Do you provide technical support for installation?
A: Yes. Layout drawings and fitting guidance are available; our engineers can advise on liner change-out and chamber setup.

Request a Quote for TRIO CT4254 Parts

.parts-table { width:100%; border-collapse:collapse; margin:16px 0; }
.parts-table th, .parts-table td { border:1px solid #ddd; padding:8px 10px; text-align:left; vertical-align:top; }
.parts-table th { background:#f5f5f5; font-weight:600; }
.parts-table tr:nth-child(even) { background:#fafafa; }
.button { display:inline-block; background:#c0392b; color:#fff !important; padding:12px 24px; border-radius:4px; text-decoration:none; font-weight:600; }
@media (max-width:768px) { .parts-table { display:block; overflow-x:auto; white-space:nowrap; } }

The post Full Set of Jaw Plates Cheek plates Wedges For TRIO CT4254 Jaw appeared first on Mining Spares | Crusher Spare Parts ,Drifter Parts ,Slurry Pump Parts.

]]>